ProSBC:Avaya IP Office with ProSBC

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking with Avaya IP Office.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• Avaya IP Office R11. For additional information on Avaya IP Office, visit Avaya Support.

Example Environments for SIP Trunking with Avaya IP Office

Example Configuration

Step by step example SIP Trunk configuration.

• Adding ProSBC as a SIP Trunk in Avaya IP Office
• SIP Trunk Configuration Instruction with Avaya IP Office

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC