Creating MTP3 Links
From TBwiki
(Redirected from Toolpack v2.5:Creating MTP3 Links)
Applies to version(s): v2.5, v2.6., v2.7
Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with an MTP2 link; they are connected in a one-to-one fashion.
To create an MTP3 link:
1- Click Create New Mtp3 Link in the MTP3 linkset configuration window
2- Configure the new MTP3 link:
- Enter a name for the link
- Under Type of link to bind, select MTP2
- Select an MTP2 link
- Click Create
3- Verify that the "Mtp3Link was successfully created" message appears
List of Parameters
- Name
- Type of Link to Bind
- Depending on the type chosen: