Creating an M3UA Route

Applies to version(s): v2.5, v2.6., v2.7

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC). To create an M3UA route:

1- Click Create New M3ua Route in the M3UA network configuration window

2- Configure the new M3UA route:

• Enter a name for the route
• Select a route type
• Select an M3UA peer server (choose Local Peer server, if associated with an OPC, select Remote Peer server, if using DPC)
• Select an M3UA user part (select NONE, if associated with a DPC)
• Select a point code
• Select a point code mask (Recommended value: Exact-match)
• Select a sub-service field type
• Click Create

3- Verify that the "M3ua Route was successfully created" message appears

List of Parameters

• Name
• Route Type
• M3UA Peer Server (only if Psrv was chosen as the route type)
• M3UA Userpart
• Point Code
• Point Code Mask
• Sub-Service Field Type