Creating an M3UA Route (SGP)

Applies to version(s): v2.5, v2.6, v2.7

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).

To create an M3UA route on an SGP:

1- Click Create New M3ua Route in the M3UA network configuration window

2- Configure the new M3UA route:

For OPC: This route is used for local point code and to reach the ASP.

• Enter a name for the route
• Select a route type:Psrv
• Select an M3UA peer server: Select the previously configured M3US Peer Server with the right RC
• Select an M3UA user part:NONE
• Select a point code: Select the OPC from the MTP3 linkset
• Select a point code mask (Recommended value: Exact match)
• Select a sub-service field type:ISUP or SCCP
• Click Create

For DPC: This route is used to reach the DPC used in MTP3 configuration.

• Enter a name for the route
• Select a route type:Mtp3
• Select an M3UA user part: Select the previously configured M3UA User Part
• Select a point code: Select the DPC from the MTP3 linkset
• Select a point code mask (Recommended value: Exact match)
• Select a sub-service field type:ISUP or SCCP
• Click Create

3- Verify that the "M3ua Route was successfully created" message appears

List of Parameters

• Name
• Route Type
• M3UA Peer Server (only if Psrv was chosen as the route type)
• M3UA Userpart
• Point Code
• Point Code Mask
• Sub-Service Field Type