Use Cases:Network Configuration A

Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port. Configure the parameters as follows:

• IP Address: 192.168.4.10
• Netmask: 255.255.255.0
• Default gateway: 192.168.4.1

• tbchangeip

Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.

• When you Create an IP Virtual Port, configure it as follows:
  • Name: vp VOIP U
  • vLanId: Untagged
  • Physical Ports: voip0, voip1

• When you Create an IP Address, configure it as follows:
  • Name: VOIP_UNTAG
  • Virtual Ports: vp VOIP U
  • IP Address: 192.168.4.20
  • Netmask: 255.255.255.0
  • Services: RTP, SIP, SIGTRAN

• Configure SIP

• Configure SIGTRAN

• When you Configure H.248, set the following:
  • Local IP Address and Public IP Address: 192.168.4.210 [Public IP orNAT public IP]

• When you Configure RADIUS, set the following:
  • Source IP interface: Any
  • Radius -> Radius Server
  • Public IP Address: Empty

Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port.

• tbchangeip

Subnet B is untagged and is bonded over VOIP0 and VOIP1 ports.

• Create Virtual Port
• Create IP Address

• Configure SIP

• Configure SIGTRAN

• Configure H.248

• Configure RADIUS

• Create Virtual Port
• Create IP Address

Subnet B uses untag bonded over VOIP0 and VOIP1 ports

• Create Virtual Port
• Create IP Address

• Configure SIP

• Configure SIGTRAN

• Configure H.248

• Configure RADIUS