Use Cases:Network Configuration IP UseCase3 A

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(Created page with "=== '''''Applies to version(s): v2.8.''''' === {{DISPLAYTITLE:Use Cases:Network Configuration}} __TOC__ The following uses cases provide guideance for the most common IP netw...")
 
Line 6: Line 6:
  
 
* [[Use_Cases:Network_Configuration_IP_UseCase1_A|IP Network Configuration:One subnet, Two IP Addresses, Untagged]]  
 
* [[Use_Cases:Network_Configuration_IP_UseCase1_A|IP Network Configuration:One subnet, Two IP Addresses, Untagged]]  
 +
 
* [[Use_Cases:Network_Configuration_IP_UseCase2_A|IP Network Configuration:Two subnets, One IP per subnet, untagged ]]  
 
* [[Use_Cases:Network_Configuration_IP_UseCase2_A|IP Network Configuration:Two subnets, One IP per subnet, untagged ]]  
 +
 
* [[Use_Cases:Network_Configuration_IP_UseCase3_A|IP Network Configuration:Two VLAN, Three IP Addresses, tagged]]
 
* [[Use_Cases:Network_Configuration_IP_UseCase3_A|IP Network Configuration:Two VLAN, Three IP Addresses, tagged]]
 +
  
 
== One subnet, Two IP Addresses, Untagged ==
 
== One subnet, Two IP Addresses, Untagged ==

Revision as of 11:07, 13 July 2015

Applies to version(s): v2.8.

Contents


The following uses cases provide guideance for the most common IP network configurations using the Web Portal:

  • IP Network Configuration:Two VLAN, Three IP Addresses, tagged


One subnet, Two IP Addresses, Untagged

UseCase OneSubTwoIpUntagged 0.png

Configure IP Network A Configure IP Network B
  • Subnet A is accessed through MGMT0
  • MGMT0 network interface modification requires the use of the tbchangeip shell script
  • Use tbchangeip with the following parameters:
    • IP Address: 192.168.4.10
    • Netmask: 255.255.255.0
    • Default gateway: 192.168.4.1


Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.

  • Delete voip0 and voip1 virtual port
  • Create VP_VOIP virtual port:
    • Name: VP_VOIP
    • vLanId: Untagged
    • Physical Ports: voip0, voip1


  • Delete voip0 and voip1 IP Address
  • Create VOIP_ADDRESS IP Address:
    • Name: VOIP_ADDRESS
    • Virtual Ports: VP_VOIP
    • IP Address: 192.168.4.20
    • Netmask: 255.255.255.0
    • Services: RTP, SIP, SIGTRAN
Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • Configure SIP
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: VOIP_ADDRESS
      • Minimum Port: 20000
      • Maximum Port: 30000
    • SIP transport server parameters:
      • Port: 5060
      • IP Interface: VOIP_ADDRESS
    • SIP NAP parameters:
      • Proxy Address: 192.168.4.110
      • Port Range: PORT_RANGE_VOIP
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 192.168.4.210

[Public IP or NAT public IP]

  • When you Configure RADIUS, set the following:
    • Source IP interface: Any
    • Radius -> Radius Server
    • Public IP Address: Empty

Two subnets, One IP per subnet, untagged

UseCase TwoSubnetsTwoIpsUntagged 0.png


Configure IP Network A Configure IP Network B
  • Subnet A is accessed through MGMT0
  • MGMT0 network interface modification requires the use of the tbchangeip shell script
  • Use tbchangeip with the following parameters:
    • IP Address: 192.168.4.10
    • Netmask: 255.255.255.0
    • Default gateway: 192.168.4.1

Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.

  • Delete voip0 and voip1 virtual port
  • Create VP_VOIP virtual port:
    • Name: VOIP_UNTAG
    • vLanId: Untagged
    • Physical Ports: voip0, voip1
  • Delete voip0 and voip1 IP Address
  • Create VOIP_ADDRESS IP Address:
    • Name: VOIP_ADDRESS
    • Virtual Ports: VP_VOIP
    • IP Address: 10.0.3.10 bonded
    • Netmask: 255.255.255.0
    • Services: RTP, SIP, SIGTRAN
Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • Configure SIP
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: VOIP_ADDRESS
      • Minimum Port: 20000
      • Maximum Port: 30000
    • SIP transport server parameters:
      • Port: 5060
      • IP Interface: VOIP_ADDRESS
    • SIP NAP parameters:
      • Proxy Address: 192.168.4.110
      • Port Range: PORT_RANGE_VOIP
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 192.168.4.210

[Public IP or NAT public IP]

  • When you Configure RADIUS, set the following:
    • Source IP interface: Any
    • Radius -> Radius Server
    • Public IP Address: Empty

Two VLAN, Three IP Addresses, tagged

UseCase TwoVlandsThreeIpsVoipAndManagementPortsUsed 0.png


Configure IP Network A Configure IP Network B

Subnet B uses untag bonded over VOIP0 and VOIP1 ports

Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • Configure SIP
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: VOIP_ADDRESS
      • Minimum Port: 20000
      • Maximum Port: 30000
    • SIP transport server parameters:
      • Port: 5060
      • IP Interface: VOIP_ADDRESS
    • SIP NAP parameters:
      • Proxy Address: 192.168.4.110
      • Port Range: PORT_RANGE_VOIP
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 192.168.4.210

[Public IP or NAT public IP]

  • When you Configure RADIUS, set the following:
    • Source IP interface: RADIUS_100
    • Radius -> Radius Server
    • Public IP Address: Empty
Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Use_Cases:Network_Configuration_IP_UseCase3_A&oldid=18864"
Personal tools