Toolpack v2.4:Create MTP3 Links (M3UA)
From TBwiki
(Difference between revisions)
(→To create an MTP3 link:) |
(→To create an MTP3 link:) |
||
| Line 9: | Line 9: | ||
*Select a '''MTP2''' as the type of link to bind | *Select a '''MTP2''' as the type of link to bind | ||
*Select an MTP2 link | *Select an MTP2 link | ||
| + | *Select a priority level (from 0 to 3) | ||
| + | *Select a Messages priority (from "none" to 3) | ||
| + | *Set the [[C Link]] value | ||
| + | *Enter a [[Link Test Slc]] (this value is unique in the link list) | ||
| + | *Enter [[Link Test Characters]] | ||
| + | *Click "Create" to finalize the configuration | ||
*Click "Create" to finalize the configuration | *Click "Create" to finalize the configuration | ||
Revision as of 13:45, 9 January 2010
To create an MTP3 link:
1. Click "Create New Mtp3 Link" in the MTP3 linkset configuration window:
2. Configure the new MTP3 link:
- Enter a name for the link
- Select a MTP2 as the type of link to bind
- Select an MTP2 link
- Select a priority level (from 0 to 3)
- Select a Messages priority (from "none" to 3)
- Set the C Link value
- Enter a Link Test Slc (this value is unique in the link list)
- Enter Link Test Characters
- Click "Create" to finalize the configuration
- Click "Create" to finalize the configuration
3. Verify that the "Mtp3Link was successfully created" message appears:
