Toolpack v2.4:Create MTP3 Links (M3UA)

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(To create an MTP3 link:)
(To create an MTP3 link:)
 
(2 intermediate revisions by one user not shown)
Line 9: Line 9:
 
*Select a '''MTP2''' as the type of link to bind
 
*Select a '''MTP2''' as the type of link to bind
 
*Select an MTP2 link
 
*Select an MTP2 link
 +
*Select a priority level (from 0 to 3)
 +
*Select a Messages priority (from "none" to 3)
 +
*Set the C Link value
 +
*Enter a Link Test Slc (this value is unique in the link list)
 +
*Enter Link Test Characters
 
*Click "Create" to finalize the configuration
 
*Click "Create" to finalize the configuration
 +
  
 
[[Image:Web_Portal_v2.4_Creating_MTP3_Link_M2UA.png|700px]]
 
[[Image:Web_Portal_v2.4_Creating_MTP3_Link_M2UA.png|700px]]

Latest revision as of 10:28, 16 January 2010

To create an MTP3 link:

1. Click "Create New Mtp3 Link" in the MTP3 linkset configuration window:

Web Portal v2.4 Create MTP3 Link.png

2. Configure the new MTP3 link:

  • Enter a name for the link
  • Select a MTP2 as the type of link to bind
  • Select an MTP2 link
  • Select a priority level (from 0 to 3)
  • Select a Messages priority (from "none" to 3)
  • Set the C Link value
  • Enter a Link Test Slc (this value is unique in the link list)
  • Enter Link Test Characters
  • Click "Create" to finalize the configuration


Web Portal v2.4 Creating MTP3 Link M2UA.png

3. Verify that the "Mtp3Link was successfully created" message appears:

Web Portal v2.4 MTP3 Link Created.png

Personal tools