Revision as of 11:59, 15 December 2014

	WARNING: the information on this page might be incomplete or inacurate

This procedure applies to Zabbix v.2.4 on CentOS6

Install Zabbix

1. Follow RedHat/CentOS installation procedure from Zabbix documentation

https://www.zabbix.com/documentation/2.4/manual/installation/install_from_packages#red_hat_enterprise_linuxcentos

Note: It is possible that you might get the following error while starting httpd on a new CentOS installation:

# service httpd start
Starting httpd: httpd: apr_sockaddr_info_get() failed for myZabbixHost
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName

Make sure to configure your hostname "myZabbixHost" to /etc/hosts

2. Configure services to automatically starts on reboot of the server

# chkconfig mysqld on
# chkconfig zabbix-server on
# chkconfig zabbix-agent on
# chkconfig httpd on

3. Disable SELinux

# setenforce 0

Edit /etc/selinux/config and set SELINUX to disabled:

# vi /etc/selinux/config
SELINUX=disabled

4. Configure the Zabbix frontend

Follow the procedure in the section Installing frontend from Zabbix documentation

https://www.zabbix.com/documentation/2.4/manual/installation/install#installing_zabbix_web_interface

5. Login to Zabbix frontend

In your browser, open Zabbix URL: http://<server_ip_or_name>/zabbix

The default user name is Admin, password zabbix

Configure SNMP traps

Reference from http://www.zabbix.org/wiki/ConfigureSnmptrapsCentos6_RHEL6).

Install Packages

# yum install net-snmp-utils
# yum install net-snmp-perl
# yum install snmptt

Note: perl-Net-SNMP will be installed together with snmptt

Configure Zabbix Server

# vi /etc/zabbix/zabbix_server.conf
StartSNMPTrapper=1
SNMPTrapperFile=/var/log/snmptt/snmptt.log

Configure snmptrapd

# vi /etc/snmp/snmptrapd.conf
traphandle default /usr/sbin/snmptthandler
authCommunity   log,execute,net public

Configure snmptt

# vi /etc/snmp/snmptt.ini
translate_log_trap_oid = 2
net_snmp_perl_enable = 1
date_time_format = %H:%M:%S %Y/%m/%d
log_file = /var/log/snmptt/snmptt.log
log_system_enable = 1

Install TelcoBridges snmptt.conf:

# wget http://download.distribution.telcobridges.com/zabbix/snmptt.conf
# cp snmptt.conf /etc/snmp/snmptt.conf

Install MIBs

Get the NET-SNMP mib path on your system:

# snmptranslate -Dinit_mib .1.3 2>&1 |grep MIBDIR
 init_mib: Seen MIBDIRS: Looking in '/root/.snmp/mibs:/usr/share/snmp/mibs' for mib dirs ...

Install the mibs files to the MIBDIRS path (ex./usr/share/snmp/mibs):

# wget http://download.distribution.telcobridges.com/mibs/install_mibs.sh
# chmod +x install_mibs.sh
# ./install_mibs.sh /usr/share/snmp/mibs

Configure snmp.conf (if the file does not exist, create the file with only the following line):

# vi /etc/snmp/snmp.conf
mibs +ALL

Start services

# chkconfig snmptt on
# chkconfig snmptrapd on
# service snmptrapd start
# service snmptt start

Open firewall

Make sure the port

# iptable -L