Use Cases:Network Configuration A

From TBwiki

(Difference between revisions)

Revision as of 14:58, 23 April 2015

Note:
A TMG3200 in a tagged configuration can use eth0 and eth1.
VoipO/Voip1 bonding is optional.

Configure IP Network A	Configure IP Network B
Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port. tbchangeip	Subnet B is untagged and bonded over VOIP0 and VOIP1 ports. When you Create an IP Virtual Port, configure it as follows: Name: vp VOIP U vLanId: Untagged Physical Ports: voip0, voip1 When you Create an IP Address, configure it as follows: Name: VOIP_UNTAG Virtual Ports: vp VOIP U IP Address: x.x.x.y Services: RTP, SIP, SIGTRAN

Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS
Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS

[image of network configuration 2]

Configure IP Network A	Configure IP Network B
Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port. tbchangeip	Subnet B is untagged and is bonded over VOIP0 and VOIP1 ports. Create Virtual Port Create IP Address

Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS
Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS

[image of network configuration 3]

Configure IP Network A	Configure IP Network B
Create Virtual Port Create IP Address	Subnet B uses untag bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address

Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS
Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS

@@ Line 49: / Line 49: @@
 *[[Toolpack:Protocol_Stack_Settings_A#SIP|Configure SIP]]
 |
-*[[Configure SIGTRAN]]
+*[[Toolpack:Protocol_Stack_Settings_A#H.248 MEGACO|Configure SIGTRAN]]
 |
 *[[Configure H.248]]