Use Cases:Network Configuration A

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(→One subnet, Two IP Addresses, Untagged)
(→One subnet, Two IP Addresses, Untagged)
Line 27: Line 27:
  
 
*When you [[Toolpack:Configuring_Virtual_Port A|Create an IP Virtual Port]], configure it as follows:
 
*When you [[Toolpack:Configuring_Virtual_Port A|Create an IP Virtual Port]], configure it as follows:
−
**Name: vp VOIP U
+
**'''Name''': vp VOIP U
−
**vLanId: Untagged
+
**'''vLanId''': Untagged
−
**Physical Ports: voip0, voip1
+
**'''Physical Ports''': voip0, voip1
  
  

Revision as of 15:08, 23 April 2015

Applies to version(s): v2.8.

Contents


This article provides the steps required to complete the most common IP network configurations using the Web Portal.

One subnet, Two IP Addresses, Untagged

UseCase OneSubTwoIpUntagged 0.png 

Note:
A TMG3200 in a tagged configuration can use eth0 and eth1.
VoipO/Voip1 bonding is optional.
Configure IP Network A Configure IP Network B

Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port.

Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.



  • When you Create an IP Address, configure it as follows:
    • Name: VOIP_UNTAG
    • Virtual Ports: vp VOIP U
    • IP Address: x.x.x.y
    • Services: RTP, SIP, SIGTRAN
Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: x.x.x.x [Public IP orNAT public IP]
  • When you Configure RADIUS, set the following:
    • Source IP interface: Any
    • Radius -> Radius Server
    • Public IP Address: Empty

Two subnets, One IP per subnet, untagged

[image of network configuration 2]

Configure IP Network A Configure IP Network B

Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port.

Subnet B is untagged and is bonded over VOIP0 and VOIP1 ports.

Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS

Two VLAN, Three IP Address, tagged

[image of network configuration 3]

Configure IP Network A Configure IP Network B

Subnet B uses untag bonded over VOIP0 and VOIP1 ports

Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Use_Cases:Network_Configuration_A&oldid=18215"
Personal tools