Use Cases:Network Configuration A

• Subnet A is access through MGMT0
• MGMT0 network interface modification requires the use of the tbchangeip shell script
• Use tbchangeip with the following parameters:
  • IP Address: 192.168.4.10
  • Netmask: 255.255.255.0
  • Default gateway: 192.168.4.1

Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.

• Delete voip0 and voip1 virtual port
• Create VP_VOIP virtual port:
  • Name: VP_VOIP
  • vLanId: Untagged
  • Physical Ports: voip0, voip1

• Delete voip0 and voip1 IP Address
• Create VOIP_ADDRESS IP Address:
  • Name: VOIP_ADDRESS
  • Virtual Ports: VP_VOIP
  • IP Address: 192.168.4.20
  • Netmask: 255.255.255.0
  • Services: RTP, SIP, SIGTRAN

• Configure SIP
  • IP range parameters:
    • Name: PORT_RANGE_VOIP
    • IP Interface: VOIP_ADDRESS
    • Minimum Port: 20000
    • Maximum Port: 30000
  • SIP transport server parameters:
    • Port: 5060
    • IP Interface: VOIP_ADDRESS
  • SIP NAP parameters:
    • Proxy Address: 192.168.4.110
    • Port Range: PORT_RANGE_VOIP

• Configure SIGTRAN

• When you Configure H.248, set the following:
  • Local IP Address and Public IP Address: 192.168.4.210

[Public IP or NAT public IP]

• When you Configure RADIUS, set the following:
  • Source IP interface: Any
  • Radius -> Radius Server
  • Public IP Address: Empty

Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port.

• tbchangeip

Subnet B is untagged and is bonded over VOIP0 and VOIP1 ports.

• Create Virtual Port
• Create IP Address

• Configure SIP

• Configure SIGTRAN

• Configure H.248

• Configure RADIUS

• Create Virtual Port
• Create IP Address

Subnet B uses untag bonded over VOIP0 and VOIP1 ports

• Create Virtual Port
• Create IP Address

• Configure SIP

• Configure SIGTRAN

• Configure H.248

• Configure RADIUS