Use Cases:Network Configuration A

From TBwiki

(Difference between revisions)

Revision as of 10:20, 13 July 2015

Configure IP Network A	Configure IP Network B
Subnet A is accessed through MGMT0 MGMT0 network interface modification requires the use of the tbchangeip shell script Use tbchangeip with the following parameters: IP Address: 192.168.4.10 Netmask: 255.255.255.0 Default gateway: 192.168.4.1	Subnet B is untagged and bonded over VOIP0 and VOIP1 ports. Delete voip0 and voip1 virtual port Create VP_VOIP virtual port: Name: VP_VOIP vLanId: Untagged Physical Ports: voip0, voip1 Delete voip0 and voip1 IP Address Create VOIP_ADDRESS IP Address: Name: VOIP_ADDRESS Virtual Ports: VP_VOIP IP Address: 192.168.4.20 Netmask: 255.255.255.0 Services: RTP, SIP, SIGTRAN

Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS
Configure SIP IP range parameters: Name: PORT_RANGE_VOIP IP Interface: VOIP_ADDRESS Minimum Port: 20000 Maximum Port: 30000 SIP transport server parameters: Port: 5060 IP Interface: VOIP_ADDRESS SIP NAP parameters: Proxy Address: 192.168.4.110 Port Range: PORT_RANGE_VOIP	Configure SIGTRAN	When you Configure H.248, set the following: Local IP Address and Public IP Address: 192.168.4.210 [Public IP or NAT public IP]	When you Configure RADIUS, set the following: Source IP interface: Any Radius -> Radius Server Public IP Address: Empty

Configure IP Network A	Configure IP Network B
Subnet A is accessed through MGMT0 MGMT0 network interface modification requires the use of the tbchangeip shell script Use tbchangeip with the following parameters: IP Address: 192.168.4.10 Netmask: 255.255.255.0 Default gateway: 192.168.4.1	Subnet B is untagged and bonded over VOIP0 and VOIP1 ports. Delete voip0 and voip1 virtual port Create VP_VOIP virtual port: Name: VOIP_UNTAG vLanId: Untagged Physical Ports: voip0, voip1 Delete voip0 and voip1 IP Address Create VOIP_ADDRESS IP Address: Name: VOIP_ADDRESS Virtual Ports: VP_VOIP IP Address: 10.0.3.10 bonded Netmask: 255.255.255.0 Services: RTP, SIP, SIGTRAN

Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS
Configure SIP IP range parameters: Name: PORT_RANGE_VOIP IP Interface: VOIP_ADDRESS Minimum Port: 20000 Maximum Port: 30000 SIP transport server parameters: Port: 5060 IP Interface: VOIP_ADDRESS SIP NAP parameters: Proxy Address: 192.168.4.110 Port Range: PORT_RANGE_VOIP	Configure SIGTRAN	When you Configure H.248, set the following: Local IP Address and Public IP Address: 192.168.4.210 [Public IP or NAT public IP]	When you Configure RADIUS, set the following: Source IP interface: Any Radius -> Radius Server Public IP Address: Empty

Configure IP Network A	Configure IP Network B
Create Virtual Port Create IP Address	Subnet B uses untag bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address

Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS
Configure SIP IP range parameters: Name: PORT_RANGE_VOIP IP Interface: VOIP_ADDRESS Minimum Port: 20000 Maximum Port: 30000 SIP transport server parameters: Port: 5060 IP Interface: VOIP_ADDRESS SIP NAP parameters: Proxy Address: 192.168.4.110 Port Range: PORT_RANGE_VOIP	Configure SIGTRAN	When you Configure H.248, set the following: Local IP Address and Public IP Address: 192.168.4.210 [Public IP or NAT public IP]	When you Configure RADIUS, set the following: Source IP interface: RADIUS_100 Radius -> Radius Server Public IP Address: Empty

@@ Line 151: / Line 151: @@
 |}
-== Two VLAN, Three IP Address, tagged ==
+== Two VLAN, Three IP Addresses, tagged ==
 [[File:UseCase_TwoVlandsThreeIpsVoipAndManagementPortsUsed_0.png]]