Replace TMG3200 Standalone With Spare

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(Added version 2.9, added a configuration backup at the start)
(Updated with link to https://docs.telcobridges.com/tbwiki/3200_Replace_Unit_With_Spare)
Line 1: Line 1:
 
'''Warning: This procedure will require some system downtime.'''
 
'''Warning: This procedure will require some system downtime.'''
 +
 +
Start with the following steps: [[3200_Replace_Unit_With_Spare|Prepare for replacement]]
  
 
The replacement of a standalone TMG3200 is comprised of following steps:
 
The replacement of a standalone TMG3200 is comprised of following steps:
  
 
== Removing the Defective Unit ==
 
== Removing the Defective Unit ==
*If unit is still active, do a configuration backup:
 
**[[Toolpack:Database_Backup_C|Configuration backup v2.8 and v2.9]]
 
**[[Toolpack:Database_Backup_B|Configuration backup v2.7]]
 
 
*Shutdown the TMG3200
 
*Shutdown the TMG3200
 
*Disconnect from the PSTN network
 
*Disconnect from the PSTN network

Revision as of 10:02, 22 December 2015

Warning: This procedure will require some system downtime.

Start with the following steps: Prepare for replacement

The replacement of a standalone TMG3200 is comprised of following steps:

Contents

Removing the Defective Unit

  • Shutdown the TMG3200
  • Disconnect from the PSTN network
  • Disconnect from the VoIP network
  • Disconnect from the Management network
  • Remove the TMG3200 from the equipment rack

Installing the Replacement Unit

Refer to TMG3200 Installation guide

  • Rack-mount the Replacement Unit
  • Connect to the Management Interface
  • Connect to the VoIP Network
  • Connect to the PSTN Network

Starting Up the TMG3200

Restoring the configuration to the replacement unit

If a database backup is available,import database using the Web Portal Backup menu:

Configuring the replacement unit

If a database backup is not available, configure the system via the web portal:

Personal tools