FreeSBC Configuration Files:Remote Workers
From TBwiki
(Difference between revisions)
(Updated tbconfig password) |
(We also need to change the IP interface names, otherwise the interfaces will be deleted in the configuration as soon as it is activated!) |
||
| Line 25: | Line 25: | ||
* Open the json file with a text editor | * Open the json file with a text editor | ||
* Replace following parameters in the file | * Replace following parameters in the file | ||
| − | ** tbsbc with the hostname that you gave on installation stage | + | ** [tbsbc] with the hostname that you gave on installation stage |
| − | ** WAN_00_IP and LAN_00_IP with IP addresses | + | ** [WAN_00_IP] and [LAN_00_IP] with IP addresses for WAN and LAN |
| − | ** WAN_00_Subnet and LAN_00_Subnet with IP subnets | + | ** [WAN_00_Subnet] and [LAN_00_Subnet] with IP subnets for both networks (format: 255.x.x.x) |
| − | ** WAN_00_Gateway and LAN_00_Gateway with Gateway IP addresses | + | ** [WAN_00_Gateway] and [LAN_00_Gateway] with Gateway IP addresses |
| − | ** Registrar_Domain_Name with Registrar Domain (IPPBX Domain) | + | ** [WAN_00] and [LAN_00] with currently configured IP interfaces (for example voip0 and voip1) |
| + | ** Registrar_Domain_Name with Registrar Domain (IPPBX Domain - must be IP address in version 3.0) | ||
** All Registrar_IP with Registrar IP Address (IPPBX IP Address) | ** All Registrar_IP with Registrar IP Address (IPPBX IP Address) | ||
*If you downloaded Remote Office/Workers Sample Configuration with NAT file please replace the following parameter too | *If you downloaded Remote Office/Workers Sample Configuration with NAT file please replace the following parameter too | ||
| − | **NAT_IP_Address with your External IP | + | **NAT_IP_Address with your External IP (Public IP of the NAT device) |
* Save the file | * Save the file | ||
Revision as of 09:48, 9 May 2019
Introduction
FreeSBC Configuration Files for Remote Office/Workers Scenario Tutorial provides you with a scenario-based approach to configuring of FreeSbc systems, using sample configuration files. Complete general installation configuration steps, before you begin configuring your specific application.
Prerequisites
FreeSBC devices must be installed as described in their respective installation guides.
Typical Remote Office/Workers Sample without NAT
Typical Remote Office/Workers Sample with NAT
Modifying configuration file
You can download sample configuration for Remote Office/Workers scenario from below;
Remote Office/Workers Sample Configuration without NAT
Remote Office/Workers Sample Configuration with NAT
- Open the json file with a text editor
- Replace following parameters in the file
- [tbsbc] with the hostname that you gave on installation stage
- [WAN_00_IP] and [LAN_00_IP] with IP addresses for WAN and LAN
- [WAN_00_Subnet] and [LAN_00_Subnet] with IP subnets for both networks (format: 255.x.x.x)
- [WAN_00_Gateway] and [LAN_00_Gateway] with Gateway IP addresses
- [WAN_00] and [LAN_00] with currently configured IP interfaces (for example voip0 and voip1)
- Registrar_Domain_Name with Registrar Domain (IPPBX Domain - must be IP address in version 3.0)
- All Registrar_IP with Registrar IP Address (IPPBX IP Address)
- If you downloaded Remote Office/Workers Sample Configuration with NAT file please replace the following parameter too
- NAT_IP_Address with your External IP (Public IP of the NAT device)
- Save the file
Uploading and activating the sample configuration
- You need to use an SFTP client to upload the configuration file to FreeSBC
- After upload the file use following commands from CLI
- For Remote Office/Workers Sample Configuration without NAT (Change user/password for web interface)
tbconfig -u root -p root -C /configurations Rmt_main_config.json name="main_config" tbconfig -u root -p root -U /systems/system_1/target_configuration="main_config"
- For Remote Office/Workers Sample Configuration with NAT
tbconfig -u root -p root -C /configurations Rmt_main_config_nat.json name="main_config" tbconfig -u root -p root -U /systems/system_1/target_configuration="main_config"
