Configuring a Virtual Port

Applies to version(s): v2.8.

One or more virtual ports can be created to manage IP traffic.

To configure a virtual port

1. Select IP Interfaces from the navigation panel:

2. Select the Virtual Ports tab abd click Create New Virtual Port:

3. Configure the IP port:

• Enter a name for the interface
• Select a service to use for the IP inteface
• Indicate whether or not to use DHCP (dynamic IP) on this port
• Enter an IP address
• Enter a Netmask
• Enter a gateway address
• Click Save

Note: The IP addresses of ETH0, ETH1, VOIP0 and VOIP1 must be on different subnets.

4. The changes are displayed in the IP interfaces information panel:

5.