Replace TMG3200 Standalone With Spare
From TBwiki
Revision as of 16:18, 9 March 2015 by Nicole Tan (Talk | contribs)
Warning: This procedure will require some system downtime.
Contents |
Overview
The replacement of a standalone TMG3200 is comprised of three parts:
- Removing the defective unit
- Installing the replacement unit
- Startup
Removing the Defective Unit
- Shutdown the TMG3200
- Disconnect from the PSTN network
- Disconnect from the VoIP network
- Disconnect from the Management network
- Remove the TMG3200 from the equipment rack
Installing the Replacement Unit
Refer to TMG3200 Installation guide
- Rack-mount the Replacement Unit
- Connect to the Management Interface
- Connect to the VoIP Network
- Connect to the PSTN Network
Starting Up the TMG3200
- Power up the TMG3200.
- Connect to the web portal
- Install the license of the replacement unit
Restoring or Configuring the replacement unit
- a. If a database backup is available
Import database using the Web Portal Backup menu
Apply the configuration on the system
- b. If a database backup is not available
Configure the system using the web portal
Apply the configuration on the system
To learn about how to do system backups, refer to: https://docs.telcobridges.com/tbwiki/Toolpack:Database_Backup_B
To learn about how to restore system backups, refer to: https://docs.telcobridges.com/tbwiki/Toolpack:Restoring_a_Database_Backup_B
