IP Network Configuration Use Case:Two subnets, One IP per subnet, untagged
From TBwiki
Revision as of 11:06, 13 July 2015 by
Allyntree
(
Talk
|
contribs
)
(diff) ← Older revision |
Latest revision
(
diff
) |
Newer revision →
(
diff
)
Jump to:
navigation
,
search
Applies to version(s): v2.8.
Contents
1
Applies to version(s): v2.8.
2
Two subnets, One IP per subnet, untagged
Two subnets, One IP per subnet, untagged
Configure IP Network A
Configure IP Network B
Subnet A is accessed through MGMT0
MGMT0 network interface modification requires the use of the tbchangeip shell script
Use
tbchangeip
with the following parameters:
IP Address
: 192.168.4.10
Netmask
: 255.255.255.0
Default gateway
: 192.168.4.1
Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.
Delete voip0 and voip1 virtual port
Create
VP_VOIP virtual port
:
Name
: VOIP_UNTAG
vLanId
: Untagged
Physical Ports
: voip0, voip1
Delete voip0 and voip1 IP Address
Create
VOIP_ADDRESS IP Address
:
Name
: VOIP_ADDRESS
Virtual Ports
: VP_VOIP
IP Address
: 10.0.3.10 bonded
Netmask
: 255.255.255.0
Services
: RTP, SIP, SIGTRAN
Configure SIP
Configure SIGTRAN
Configure H.248
Configure RADIUS
Configure SIP
IP range parameters:
Name
: PORT_RANGE_VOIP
IP Interface
: VOIP_ADDRESS
Minimum Port
: 20000
Maximum Port
: 30000
SIP transport server parameters:
Port
: 5060
IP Interface
: VOIP_ADDRESS
SIP NAP parameters:
Proxy Address
: 192.168.4.110
Port Range
: PORT_RANGE_VOIP
Configure SIGTRAN
When you
Configure H.248
, set the following:
Local IP Address and Public IP Address
: 192.168.4.210
[Public IP or NAT public IP]
When you
Configure RADIUS
, set the following:
Source IP interface
: Any
Radius -> Radius Server
Public IP Address
: Empty
Views
Page
Discussion
Personal tools
Log in / create account
Navigation
Main Page
Glossary
Frequently Asked Questions
Recent changes
Random page
Help
Search
Toolbox
What links here
Related changes
Special pages
Permanent link