IP Network Configuration Use Case:One subnet, Two IP Addresses, Untagged

One subnet, Two IP Addresses, Untagged

Configure IP Network A Configure IP Network B Subnet A is accessed through MGMT0 MGMT0 network interface modification requires the use of the tbchangeip shell script Use tbchangeip with the following parameters: IP Address: 192.168.4.10 Netmask: 255.255.255.0 Default gateway: 192.168.4.1 Subnet B is untagged and bonded over VOIP0 and VOIP1 ports. Delete voip0 and voip1 virtual port Create VP_VOIP virtual port: Name: VP_VOIP vLanId: Untagged Physical Ports: voip0, voip1 Delete voip0 and voip1 IP Address Create VOIP_ADDRESS IP Address: Name: VOIP_ADDRESS Virtual Ports: VP_VOIP IP Address: 192.168.4.20 Netmask: 255.255.255.0 Services: RTP, SIP, SIGTRAN Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS Configure SIP IP range parameters: Name: PORT_RANGE_VOIP IP Interface: VOIP_ADDRESS Minimum Port: 20000 Maximum Port: 30000 SIP transport server parameters: Port: 5060 IP Interface: VOIP_ADDRESS SIP NAP parameters: Proxy Address: 192.168.4.110 Port Range: PORT_RANGE_VOIP Configure SIGTRAN When you Configure H.248, set the following: Local IP Address and Public IP Address: 192.168.4.210 [Public IP or NAT public IP] When you Configure RADIUS, set the following: Source IP interface: Any Radius -> Radius Server Public IP Address: Empty