Modifying RTP and Audio Settings

Applies to version v3.0, v3.1, v3.2

To configure RTP and Audio settings, do the following:

1- Click RTP and Audio in the Editing Profile window, to display the customizable options.

2- Modify settings as required.

• Click Save

List of Parameters

Drop Call Thresholds

• No Rx Packets

Codec

• G726 AAL2 format

Jitter Buffer

• Jitter Buffer: Initial Depth
• Jitter Buffer: Minimum Depth
• Jitter Buffer: Maximum Depth
• Jitter Buffer: Smooth deletion

TDM Volume Control

• TX Gain Level
• RX Gain Level

Echo Cancellation

• Echo Cancellation: Enabled
• Echo Cancellation: Gain Power Level
• Echo Cancellation: Enable DC Removal Filter
• Echo Cancellation: Enable Coefficient Update
• Echo Cancellation: Non Linear Processor Tune Option

RTCP

• RTCP: Enabled
• RTCP: Transmission Interval
• RTCP: Use XRTCP
• RTCP: SDES-CNAME

Voice Activity Detection

• Voice Activity Detection: Noise floor level

Packet Network

• Packet Network: Type of Service
• Packet Network: SSRC randomization
• Packet Network: Packet Loss Concealment

Clear Channel

• Packet Duration