Modifying Profile for SPIROU

This article applies to:	Product	Version
	Tmedia	2.8, 2.9, 2.10, 3.0, 3.2

Note
This articles assumes that SS7 ISUP is configured. 
In addition, if you want to validate the SPIROU configuration, you must repeat these steps for all of the profiles in your current configuration.

1- Select Profiles from the navigation panel

2- Select the profile you wish to configure

3- Expand the SIP section and set the following parameter check boxes:

• Forward SS7 suspend/resume must be checked
• Forward SS7 CPG hold/retrieval must be checked
• Forward SIP hold type must be set to SS7 Suspend/Resume or SS7 Remote Hold/Retrieval
• Max Forwards header handling must be set to Decrement and forward

4- Expand the SS7 section and set the following parameter check boxes:

• Forward call suspend/resume must be checked
• Forward call CPG hold/retrieval must be checked
• Hop Counter IE handling must be set to Decrement and forward

5- Expand the SS7 or ISDN section and set the following parameter checkboxes:

• Information transfer capability must be set to Relay
• Click Save

6- Verify that the "Profile was successfully updated" message is displayed

List of Parameters

• Use SIP strict routing
• Detect 180 with SDP as early media
• Send 180 with SDP
• Don't forward 183 progress
• Use non ambiguous From tag
• Use reason header
• Use isup-oli format
• Enable SIP Custom Headers
• Forward SS7 suspend/resume
• Forward SS7 CPG hold/retrieval
• Forward SIP hold type
• Max Forwards header handling
• User-to-User encoding
• SDP generation options
• SDP combining options

• SS7: Send Charge Number IE in IAM
• SS7: Do not Forward Early ACM
• SS7: Forward call suspend/resume
• SS7: Forward CPG hold/retrieval
• SS7: Forward Call Indicator (international)
• SS7: Default forward call indicator)
• SS7: Default forward call indicator enforce mask)
• SS7: Default Backward Call Indicator
• SS7: Default Backward Call Indicator enforce mask
• SS7: Force backward call indicator in ANM
• SS7: Hop Counter IE handling
• SS7: Forward application transport IE

• SS7 or ISDN: Information Transfer Capability
• SS7 or ISDN: Send Display IE
• SS7 or ISDN: Send Connected Number IE
• SS7 or ISDN: Always Send ALERTING
• SS7 or ISDN: Network Specific Facilities IE
• SS7 or ISDN: Support 2 Calling Number IE
• SS7 or ISDN: Caller name (CNAM) using alternate methods
  • SS7 or ISDN: CNAM collection timeout