IP Network Configuration Use Case:Management, Sigtran, Radius and H.248 on tagged vLan, all through VoIP ports, untagged SIP/RTP on separate IP

Name: PORT_RANGE_VOIP
IP Interface: VOIP_ADDRESS
Minimum Port: 20000
Maximum Port: 30000

From TBwiki

Revision as of 14:40, 10 December 2020 by Allyntree (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This article applies to:	Product	Version
	Tmedia	2.8, 2.9, 2.10, 3.0, 3.2

Two VLAN: tagged VLAN for management, sigtran, radius and H.248, Untagged subnet for SIP/RTP/ on separate IP, all through VoIP ports

UseCase ManagentSigtranRadiusH248onTaggedVlan ViaVoipport SIPRTPSepaateIPUntagged 0.png

Configure IP Network A	Configure IP Network B
Vlan 100 uses tagged bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address	Subnet B uses untagged bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address

Configure SIP	Configure SIGTRAN	Configure H.248	Configure RADIUS
Configure SIP IP range parameters: Name: PORT_RANGE_VOIP IP Interface: VOIP_ADDRESS Minimum Port: 20000 Maximum Port: 30000 SIP transport server parameters: Port: 5060 IP Interface: VOIP_ADDRESS SIP NAP parameters: Proxy Address: 10.0.3.x/24 Port Range: PORT_RANGE_VOIP	Configure SIGTRAN	When you Configure H.248, set the following: Local IP Address and Public IP Address: 192.168.4.x/24 [Public IP or NAT public IP]	When you Configure RADIUS, set the following: Source IP interface: RADIUS_100 Radius -> Radius Server Public IP Address: Empty