Toolpack v2.4:Create MTP2 Links
From TBwiki
The MTP2 link is used to connect the MTP2 physical layer to a line service carrying SS7 signaling.
To create an MTP2 link:
1. Click "Create New Mtp2 Link" in the MTP2 configuration window:
2. Configure the new MTP2 link:
- Enter a name for the new link
- Select a connection mode:
- Normal
- Hsl
- Select a line service
- Assign timeslots to the link
- Select a protocol type:
- ITU92
- ITU88
- ANSI88
- ANSI92
- TTC
- NTT
- Select a DPC length:
- 16 bits
- 24 bits
- Select a timeslot rate:
- 64 Kbps
- 56 Kbps
- 48 Kbps
- Click "Create" to finalize the configuration
3. Verify that the "MTP2 link was successfully created" message appears:
