ProSBC:FusionPBX

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk or remote client access for FusionPBX server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• FusionPBX.For additional information on FusionPBX, visit FusionPBX offical web site.

Example Environments for SIP Trunking with FusionPBX

Example Configuration

Step by step example SIP Trunk configuration.

• FusionPBX Trunk Creation
• SIP Trunking Example Configuration

Example Environments for Remote Workers with FusionPBX

Example Configuration

Step by step example Remote workers configuration.

• FusionPBX Extension Creation
• Remote Workers Configuration Instruction with FusionPBX

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC