Configuring the SNMP Agent
From TBwiki
| This article applies to: | Product | Version |
| Tmedia | 2.9, 2.10, 3.0, 3.2 | |
| SBC | 3.0, 3.1 |
Once you have successfully activated the tbSnmpAgent application, follow these steps to configure the SNMP system parameters:
1-Click Services in the navigation panel.
2-Select the SNMP tab.
3-Enter values for the following parameters:
- SNMP IP Port: The IP port to use for making SNMP requests (standard default value is 161).
- SNMP System Description: The textual description that will appear when polling the sysDescr variable of the SNMPv2-MIB.
- SNMP System Object ID: The value appended to TelcoBridges' value (.1.3.6.1.4.1.21776.3) for the SNMPv2-MIB variable sysObjectId**SNMP System Name: the textual description that will appear when polling the sysName variable of the SNMPv2-MIB.
- SNMP System Location: The textual description that will appear when polling the sysLocation variable of the SNMPv2-MIB.
- SNMP System Contact: The textual description that will appear when polling the sysContact variable of the SNMPv2-MIB.
4-Click Advanced Params to view or change advanced settings for the following parameter(s):
- Polling delay to generate traps: Sets the length (in seconds) for the time intervals at which the SNMP agent polls for newly generated traps.
- Use system names: Indicates that SNMP uses the names interfaces of the system instead of the names interfaces generated by adapters.
- Click Save
5-Verify that the ApplicationCfg was sucessfully updated message is displayed.
Path
/configurations/@[configuration_name]/snmp_services/configuration
Parameters (text)
/configurations/@[configuration_name]/snmp_services/configuration ip_port = 161 system_contact = "" system_description = "" system_location = "" system_object_id = "1" use_system_names = false
Parameters (json)
{
"ip_port" : 161,
"system_contact" : "",
"system_description" : "",
"system_location" : "",
"system_object_id" : "1",
"use_system_names" : false,
}
List of Parameters
- SNMP IP port
- SNMP System Description
- SNMP System Object ID
- SNMP System Name
- SNMP System Location
- SNMP System Contact
- Advanced SNMP Parameters
