Creating an M2PA SAP
From TBwiki
| This article applies to: | Product | Version |
| Tmedia | 2.9, 2.10, 3.0, 3.2 |
After you create an M2PA configuration, you must create a new M2PA service access point (SAP). This functions as the identifying label for endpoints in the network.
To create a new M2PA SAP:
1- Select M2PA from the navigation panel
2- Click Create new M2PA Sap
3- Configure the new M2PA SAP:
- Enter a name for the SAP
- Enter an SCTP source port for the SAP
- Click Create
4- Verify that the "M2pa Sap was successfully created" message appears
5- Associate IP interfaces
- Select an IP interface from the list in the information panel
- Click the "<<" button to add the selected IP interface. This is the outgoing route from the hardware adapter.
Before 
After 
Path
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]/m2pa_saps/@[m2pa_sap]
Parameters (text)
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]/m2pa_saps/@[m2pa_sap] ip_interfaces = [ "@[hardware_name].@[voip_name]" ] name = "@[m2pa_sap]" sctp_source_port = 3565 /configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]/m2pa_saps/@[m2pa_sap]/advanced_parameters abort_nego_if_nb_stream_mismatch = false bundle_timer = "" cookie_life_time = "30 seconds" flow_control_down_threshold = 1000 flow_control_up_threshold = 2000 freeze_timer = "1500 milliseconds" handle_init_data = true heartbeat_delay = "1500 milliseconds" max_data_burst = 4 max_data_size = 1000 max_datagrams_ack = 10 max_delay_ack = "100 milliseconds" rto_init = "1500 milliseconds" rto_max = "2 seconds" rto_max_hearbeat = 1 rto_min = "100 milliseconds" shutdown_guard_timer = "75 seconds" /configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]/m2pa_saps/@[m2pa_sap]/timers maximum_primitive_retry = 5 sctp_association_timer = "3 minutes" sctp_datagram_lifetime = 200 sctp_primitive_timer = "1 second"
Parameters (json)
{
"advanced_parameters" : {
"abort_nego_if_nb_stream_mismatch" : false,
"bundle_timer" : "",
"cookie_life_time" : "30 seconds",
"flow_control_down_threshold" : 1000,
"flow_control_up_threshold" : 2000,
"freeze_timer" : "1500 milliseconds",
"handle_init_data" : true,
"heartbeat_delay" : "1500 milliseconds",
"max_data_burst" : 4,
"max_data_size" : 1000,
"max_datagrams_ack" : 10,
"max_delay_ack" : "100 milliseconds",
"rto_init" : "1500 milliseconds",
"rto_max" : "2 seconds",
"rto_max_hearbeat" : 1,
"rto_min" : "100 milliseconds",
"shutdown_guard_timer" : "75 seconds"
},
"ip_interfaces" : [
"@[hardware_name].@[voip_name]"
],
"name" : "@[m2pa_sap]",
"sctp_source_port" : 3565,
"timers" : {
"maximum_primitive_retry" : 5,
"sctp_association_timer" : "3 minutes",
"sctp_datagram_lifetime" : 200,
"sctp_primitive_timer" : "1 second"
}
}
