Creating an M3UA Configuration
From TBwiki
| This article applies to: | Product | Version |
| Tmedia | 2.9, 2.10, 3.0, 3.2 |
To set up a M3UA system on an IP server process (IPSP), you must create an M3UA configuration. In this configuration the SS7 MTP2 and MTP3 layers are replaced entirely by the SIGTRAN M3UA layer. The system is typically set up on two IP signaling points.
To create an M3UA configuration on IPSP:
1- Click M3UA in the navigation panel:
2- Configure the M3UA service for IPSP:
- Enter a name for the configuration
- Select IP Server Process (IPSP) as the node type
- Click Create
3- Verify that the "M3ua Cfg was successfully created" message appears
Path
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]
Parameters (text)
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name] enabled = false name = "@[m3ua_name]" node_type = "IP Server Process (IPSP)" /configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/advanced_parameters as_pending_timer = "5 seconds" asp_down_timer = "2 seconds" asp_msg_timer = "2 seconds" asp_up_timer = "2 seconds" cong_level_1 = 500 cong_level_2 = 600 cong_level_3 = 750 daud_timer = "2 seconds" destination_restrict_supported = false drkm_nb_msg = 3 drkm_timer = "2 seconds" duna_settle_timer = "1 second" heartbeat_timer = "" mtp3_status_timer = "5 seconds" only_one_hardware_unit_active = false restart_timer = "10 seconds" seq_control_timer = "1 second"
Parameters (json)
{
"advanced_parameters" : {
"as_pending_timer" : "5 seconds",
"asp_down_timer" : "2 seconds",
"asp_msg_timer" : "2 seconds",
"asp_up_timer" : "2 seconds",
"cong_level_1" : 500,
"cong_level_2" : 600,
"cong_level_3" : 750,
"daud_timer" : "2 seconds",
"destination_restrict_supported" : false,
"drkm_nb_msg" : 3,
"drkm_timer" : "2 seconds",
"duna_settle_timer" : "1 second",
"heartbeat_timer" : "",
"mtp3_status_timer" : "5 seconds",
"only_one_hardware_unit_active" : false,
"restart_timer" : "10 seconds",
"seq_control_timer" : "1 second"
},
"enabled" : false,
"name" : "@[m3ua_name]",
"node_type" : "IP Server Process (IPSP)"
}
List of Parameters
