Creating an M3UA Network
From TBwiki
This article applies to: | Product | Version |
Tmedia | 2.9, 2.10, 3.0, 3.2 |
Just like the M3UA SAP, the M3UA network is another important component of an M3UA configuration.
To create an M3UA network:
1- Click M3UA in the navigation panel:
2- Click Create New M3ua Network in the M3UA configuration panel
3- Configure the new M3UA network:
- Enter a name for the network
- Select a protocol type
- Select a sub-service field
- Select a DPC length
- Select an SLS range
- Click Create
4- Verify that the "M3ua Network was successfully created" message appears
Path
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]
Parameters (text)
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network] name = "@[m3ua_network]" point_code_length = "14bits format=3.8.3" protocol_type = "ITU" sls_range = "4 bits" sub_service_field = "National"
Parameters (json)
{ "name" : "@[m3ua_network]", "point_code_length" : "14bits format=3.8.3", "protocol_type" : "ITU", "sls_range" : "4 bits", "sub_service_field" : "National" }