Creating an M3UA Route

Applies to version(s): v2.8

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require one route per point codes in your system. This means one route for each DPC (SSP and STP) and one route for each source point code (OPC). To create an M3UA route:

1- Click M3UA in the navigation panel:

2- Select an M3ua Network:

3- Click Create New M3ua Route in the M3UA network configuration window

4- Configure the new M3UA route:

• Enter a name for the route
• Select a route type
• Select an M3UA peer server (choose Local Peer server, if associated with an OPC, select Remote Peer server, if using DPC)
• Select an M3UA user part (select NONE, if associated with a DPC)
• Select a point code
• Select a point code mask (Recommended value: Exact-match)
• Select a sub-service field type
• Click Create

5- Verify that the "M3ua Route was successfully created" message appears

List of Parameters

• Name
• Route Type
• M3UA Peer Server (only if Psrv was chosen as the route type)
• M3UA Userpart
• Point Code
• Point Code Mask
• Sub-Service Field Type