Creating an MTP3 Route

Applies to version(s): v2.5, v2.6., 2.7

MTP3 routes are built to route traffic from previously created point codes using linksets.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).

To create an MTP3 route:

1- Click Create New Mtp3 Route in the MTP3 network configuration window:

2- Configure the new MTP3 route:

• Enter a name for the route
• Select a point code for the route
• Select a restart procedure
• Select a point type
• Check the Route to Adjacent box, if this route is directed to an adjacent network
• Click Create

3- Verify that the "Mtp3Route was successfully created" message appears

4- Associate the newly created route with a linkset:

• Select a linkset from the list provided at the bottom of the route configuration window
• Click the "<<" button to associate the linkset with the newly created route

List of Parameters

• Name
• Point Code
• Restart Procedure
• Point Type
• Route to Adjacent