Creating the M2UA Configuration

This article applies to:	Product	Version
	Tmedia	2.9, 2.10, 3.0, 3.2

To create your M2UA system, you must create a new M2UA configuration.

M2UA (Message Transfer Part 2 User Adaptation Layer) is used to interface the MTP2 Layer of a signaling gateway to the MTP3 Layer of a media gateway controller (MGC). M2UA can also be seen as a way to extend an MTP2 link. An M2UA link is always bound to an MTP2 link.

To create an M2UA configuration:

1- Click M2UA in the navigation panel

2- Create the M2UA configuration:

• Enter a name for the M2UA service
• Select a Node Type (SG, ASP, M2UA-MTP2 Relay)
• Click Create

3- Verify that the "M2ua Cfg was successfully created" message appears

Path

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2ua_stacks/@[m2ua_stack]

Parameters (text)

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2ua_stacks/@[m2ua_stack]
enabled             = true
name                = "@[m2ua_stack]"
node_type           = "Signaling Gateway (SG)"

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2ua_stacks/@[m2ua_stack]/advanced_parameters
one_identifier_per_primitive = false

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2ua_stacks/@[m2ua_stack]/timers
ack_timer           = "1 second"
as_pending_timer    = "1 second"
heartbeat_timer     = ""
nb_aspm_retry       = 5
sctp_poll_timer     = "1 second"
ss7_cong_poll_timer = "1 second"

Parameters (json)

{
  "advanced_parameters" : {
    "one_identifier_per_primitive" : false
  },
  "enabled" : true,
  "name" : "@[m2ua_stack]",
  "node_type" : "Signaling Gateway (SG)",
  "timers" : {
    "ack_timer" : "1 second",
    "as_pending_timer" : "1 second",
    "heartbeat_timer" : "",
    "nb_aspm_retry" : 5,
    "sctp_poll_timer" : "1 second",
    "ss7_cong_poll_timer" : "1 second"
 }

List of Parameters

• Name
• M2UA Node Type