Revision as of 00:51, 11 February 2020

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk and Microsoft’s Skype for Business Server 2015 environment using TCP only.

In this introduction we used G.711 on SIP Trunk. There is no transcoding available. If your SIP trunk will use other codec then G.711, please check our transcoding solution. FreeSbc is capable to connect your IP-PBX to Skype for low cost VoIP calls using the Skype Connect. This is a simple how to connecting FreeSBC to Skype.

Prerequisites

FreeSBC devices must be installed as described in their respective installation guides.
Skype Connect Account

Typical Skype Connect Sample

SKYPE CONNECT CONFIGURATION

(Step 1) Create IP Network	(Step 2) Create Protocol Stack	(Step 3) Create Call Route
Configuring an IP Virtual Port Configuring a VLAN Configuring IP Interfaces Create an IP port range	Create an IP port range Create a SIP stack Create a SIP transport server Modify profile Allocate a SIP NAP Allocate an open SIP NAP	Create a first call route

Example Configuration

Step by step example Skype Connect with FreesBC configuration.

Skype Connect Example Configuration

Troubleshooting

Call Trace (Paid version only)	Test Call (Paid version only)	TBReport	Advanced Troubleshooting of FreeSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of FreeSBC

@@ Line 3: / Line 3: @@
 =Introduction=
-Skype Connect provides connectivity between your business and the Skype community. By adding Skype Connect to your existing SIP-enabled PBX, your business can save on communication costs with little or no additional upgrades required.
+This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk and Microsoft’s Skype for Business Server 2015 environment using TCP only.
-With Skype Connect, your business can make great value Skype calls and receive calls from your customers using your desk phones. Customers using Skype can call your company’s Skype number with just a click of a button – using the Click & Call feature – making your company easier to reach.
+In this introduction we used G.711 on SIP Trunk. There is no transcoding available. If your SIP trunk will use other codec then G.711, please check our transcoding solution.
 [[FreeSBC|FreeSbc]] is capable to connect your IP-PBX to Skype for low cost VoIP calls using the Skype Connect. This is a simple how to connecting FreeSBC to Skype.

FreeSBC:S4B with TCP 1

Revision as of 00:51, 11 February 2020

Contents

Introduction

Prerequisites

Typical Skype Connect Sample

SKYPE CONNECT CONFIGURATION

Example Configuration

Troubleshooting

Views

Personal tools

Navigation

Search

Toolbox