Use Cases: IP Network Configuration

This article applies to:	Product	Version
	Tmedia	2.8, 2.9, 2.10, 3.0, 3.2

The following uses cases provide guideance for the most common IP network configurations using the Web Portal.

Select a use case to learn about its configuration.

IP Network Configuration One subnet, Two IP Addresses, Untagged	IP Network Configuration Two subnets, One IP per subnet, untagged	IP Network Configuration Two VLAN, Three IP Addresses, tagged

IP Network Configuration Two VLAN, Three IP Addresses, all through VoIP ports, tagged	IP Network Configuration Two tagged VLAN, Four IP Addresses, all through VoIP ports, SIP/RTP on separate IP	IP Network Configuration Two VLAN: tagged VLAN for management, radius and H.248, Untagged VLAN for SIP/RTP/Sigtran on separate IP, all through VoIP ports

IP Network Configuration Two VLAN: tagged VLAN for management, sigtran, radius and H.248, Untagged subnet for SIP/RTP/ on separate IP, all through VoIP ports	IP Network Configuration Two VLAN: tagged VLAN for Sigtran, radius and H.248, Untagged VLAN for SIP/RTP on separate IP, all through VoIP ports, Management local only	IP Network Configuration Four VLAN: tagged VLAN 100 for management, VLAN 200 for SIP/RTP, VLAN 300 for Sigtran, VLAN 400 for Radius, all through VoIP ports

IP Network Configuration Four VLAN: tagged VLAN 100 for management, VLAN 200 for Sigtran, VLAN 300 RTP, VLAN 400 for H.248, all through VoIP ports	IP Network Configuration One VLAN, One IP Addresses, all tagged traffic one IP (TMG800 only)	IP Network Configuration One IP Addresses except for management, all tagged traffic, local only (TMG800 only)

IP Network Configuration Three VLAN: VLAN 100 for management through ETH ports, VLAN 200 for Sigtran and H.248, VLAN 300 for RTP through VoIP ports