IP Network Configuration Use Case:Separated traffic, H.248, Sigtran, RTP, four IPs, all through Voip ports

From TBwiki
Jump to: navigation, search
This article applies to: Product Version
Tmedia 2.8, 2.9, 2.10, 3.0, 3.2


Four VLAN: tagged VLAN 100 for management, VLAN 200 for Sigtran, VLAN 300 RTP, VLAN 400 for H.248, all through VoIP ports

UseCase SeparatedTrafficH248SigtranRTPFourIPsallthroughVoip ports 0.PNG

Configure IP Network A Configure IP Network B Configure IP Network C Configure IP Network D

Vlan 100 uses tagged bonded over VOIP0 and VOIP1 ports

Vlan 200 use tagged bonded over VOIP0 and VOIP1 ports

Vlan 300 uses tagged bonded over VOIP0 and VOIP1 ports

Vlan 400 uses tagged bonded over VOIP0 and VOIP1 ports

Configure RTP Configure SIGTRAN Configure H.248
  • Creating an IP Port Range
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: Boned to RTP port range
      • Minimum Port: 20000
      • Maximum Port: 30000
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 192.168.4.x/24

[Public IP or NAT public IP]

Personal tools