FreeSBC:SIP Trunking:Configuration A

Introduction

The SIP Trunking COnfiguration Tutorial provides you with a scenario-based approach to configuring and monitoring the status of FreeSbc systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific application.

Prerequisites

FreeSbc devices must be installed as described in their respective installation guides.

Typical SIP Trunking Sample

SIP TRUNKING CONFIGURATION

(Step 1) Create IP Network	(Step 2) Create Protocol Stack	(Step 3) Create Call Route
Configuring an IP Virtual Port Configuring a VLAN Configuring IP Interfaces Create an IP port range	Create an IP port range Create a SIP stack Create a SIP transport server Modify profile Allocate a SIP NAP Allocate an open SIP NAP	Create a first call route

Troubleshooting

Call trace	Test Call	Capturing Ethernet Traffic	TBReport
Configure call trace Retrieve call trace	Creating a Test Call	Capturing on a FreeSBC	Capture a report of the system