IP Network Configuration Use Case:Separated traffic, H.248, Sigtran, RTP, four IPs, all through Voip ports

Name: PORT_RANGE_VOIP
IP Interface: Boned to RTP port range
Minimum Port: 20000
Maximum Port: 30000

From TBwiki

Revision as of 14:41, 10 December 2020 by Allyntree (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This article applies to:	Product	Version
	Tmedia	2.8, 2.9, 2.10, 3.0, 3.2

Four VLAN: tagged VLAN 100 for management, VLAN 200 for Sigtran, VLAN 300 RTP, VLAN 400 for H.248, all through VoIP ports

UseCase SeparatedTrafficH248SigtranRTPFourIPsallthroughVoip ports 0.PNG

Configure IP Network A	Configure IP Network B	Configure IP Network C	Configure IP Network D
Vlan 100 uses tagged bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address	Vlan 200 use tagged bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address	Vlan 300 uses tagged bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address	Vlan 400 uses tagged bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address

Configure RTP	Configure SIGTRAN	Configure H.248
Creating an IP Port Range IP range parameters: Name: PORT_RANGE_VOIP IP Interface: Boned to RTP port range Minimum Port: 20000 Maximum Port: 30000	Configure SIGTRAN	When you Configure H.248, set the following: Local IP Address and Public IP Address: 192.168.4.x/24 [Public IP or NAT public IP]