Web Portal Tutorial Guide v2.5

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(→Configuring SS7)
(→Web Portal Basics: Add minor package upgrade section)
 
(180 intermediate revisions by 8 users not shown)
Line 1: Line 1:
−
'''PAGE CURRENTLY UNDER CONSTRUCTION'''
 
−
 
−
 
 
=Introduction=
 
=Introduction=
 
This guide is designed to provide users with a scenario-based approach to installing  [[Tmedia]] and [[Tdev]] systems, using the Web Portal configuration tool. This means that users must first go through the steps that are general to all installations, and subsequently follow the instructions that are specific to their particular application scenario (this corresponds to the type of service, and hardware system being set up).
 
This guide is designed to provide users with a scenario-based approach to installing  [[Tmedia]] and [[Tdev]] systems, using the Web Portal configuration tool. This means that users must first go through the steps that are general to all installations, and subsequently follow the instructions that are specific to their particular application scenario (this corresponds to the type of service, and hardware system being set up).
Line 26: Line 23:
  
  
−
==General Web Portal Applications==
+
== Web Portal Disposition ==
 +
The Web Portal is divided up into eight major sections reflected in the navigation bar located on the left-hand side of the  portal. These are:
  
−
<b>''IMPORTANT!''</b> The Topics covered in the following table are common to <u>all</u> TMedia installations.
+
#'''[[Web Portal Sections:Status|Status]]'''  -- series of screens providing overall system status as well as the status of various  active applications, services, interfaces, and protocols
−
Therefore, this section should be consulted before moving on to any other.
+
#'''[[Web Portal Sections:Users|Users]]'''  -- list of all individuals with access to the system
 +
#'''[[Web Portal Sections:Logs|Logs]]'''  -- view or  download records of system activity
 +
#'''[[Web Portal Sections:Backups|Backups]]'''  -- create, download or restore copies of the overall system configuration data
 +
#'''[[Web Portal Sections:Packages|Packages]]'''  -- list of installed releases of the system software
 +
#'''[[Web Portal Sections:Systems|Systems]]'''  -- list of hardware devices and configuration settings
 +
#'''[[Web Portal Sections:Configurations|Configurations]]'''  -- list of settings that have been created for a device
 +
#'''[[Web Portal Sections:Gateway|Gateway]]'''  -- options for configuring network access points, call detail records, calling routes,  etc.
  
  
−
'''Topics covered here:'''
+
== Web Portal Basics==
−
* The basic knowledge needed to properly navigate through the Web Portal '''(A)'''.
+
−
* The fundamentals of user account management and permission masks '''(B)'''.
+
−
* The initial steps required for first starting the Web Portal, and verifying that it is functioning properly '''(C)'''.
+
−
*The process involved in backing up your database for the first time '''(D)'''.
+
  
 +
'''''IMPORTANT!''''' The Topics covered in the following table are common to <u>all</u> TMedia installations. Therefore, this section should be consulted before moving on to any other.
 +
 +
<br> '''Topics covered here:'''
 +
 +
*The basic knowledge needed to properly navigate through the Web Portal '''(A)'''.
 +
*The fundamentals of user account management and permission masks '''(B)'''.
 +
*The initial steps required for first starting the Web Portal, and verifying that it is functioning properly '''(C)'''.
 +
*The process involved in backing up your database for the first time '''(D)'''.
 +
*The process involved in first configuring your IP interfaces '''(E)'''.
 +
 +
<br>
  
 
{| cellpadding="5" border="1" class="wikitable"
 
{| cellpadding="5" border="1" class="wikitable"
 
|-
 
|-
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Topic A) <br>Web Portal Basics  
+
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | (Topic A) <br>Web Portal Basics  
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Topic B) <br>Log-on and User Access Levels
+
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | (Topic B) <br>Log-on and User Access Levels  
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Topic C) <br>Application Start-up and Verification
+
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | (Topic C) <br>Application Start-up and Verification  
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Topic D) <br>Database Backup
+
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | (Topic D) <br>Database Backup
−
 
+
 
|-
 
|-
−
| valign="top" |
+
| valign="top" |  
−
*[[Toolpack_v2.5:Navigating_the_Web_Portal|Navigating the Web Portal]]
+
*[[Toolpack: Navigating the Web Portal A|Navigating the Web Portal]]  
−
*[[Typographic_conventions|Typographic Conventions]]
+
*[[Toolpack:Typographic Conventions A|Typographic Conventions]]
  
 +
<br>
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Connecting_to_the_Web_Server_and logging on to the web portal|Connect to the web server and log on to the Web Portal]]
+
*[[Toolpack:Connecting to the Web Server and logging on to the web portal A|Connect to the web server and log on to the Web Portal]]  
−
*[[Toolpack:User_access|User Access]]
+
*[[Toolpack:User access A|User Access]]  
−
**[[Toolpack_v2.5:Viewing_the_User_List|Viewing the User List]]
+
**[[Toolpack:Viewing the User List A|Viewing the User List]]  
−
**[[Toolpack_v2.5:Creating_a_New_User|Creating a New User]]
+
**[[Toolpack:Creating a New User A|Creating a New User]]  
−
**[[Toolpack_v2.5:Deleting_a_User|Deleting a User]]
+
**[[Toolpack:Deleting a User A|Deleting a User]]  
−
**[[Toolpack_v2.5:Logging_Off_Toolpack|Logging Off]]
+
**[[Toolpack:Logging Off A|Logging Off]]
 +
*[https://forums.telcobridges.com/viewtopic.php?f=12&t=248&p=1101&hilit=privilege#p1101 User privilege level]
  
 
| valign="top" |  
 
| valign="top" |  
 +
*[[Toolpack:Viewing the List of Installed Applications A|Viewing the List of Installed Applications]]
 +
*[[Toolpack:Starting an Application A|Starting an Application]]
 +
*[[Toolpack:Verifying that an Application is Operating A|Verifying that an Application is Operating]]
 +
**[[Toolpack:Verifying the Application Path A|Verifying the Application Path]]
 +
*[[Toolpack:Activating the Configuration A|Activating the Configuration]]
 +
**[[Toolpack:Status Menus:Applications A|Verifying status]]
  
−
*[[Toolpack_v2.5:Viewing_the_List_of_Installed_Applications|Viewing the List of Installed Applications]]
+
| valign="top" |  
−
*[[Toolpack_v2.5:Starting_an_Application|Starting an Application]]
+
*[[Toolpack:Database Backup A|Carrying out a First Database Backup]]
−
*[[Toolpack:Verifying_that_an_Application_is_Operating|Verifying that an Application is Operating]]
+
*[[Toolpack:Downloading a Database Backup A|Downloading a Database Backup]]
−
**[[Toolpack_v2.5:Verifying_the_Application_Path|Verifying the Application Path]]
+
*[[Toolpack:Uploading a Database Backup A|Uploading a Database Backup]]
−
*[[Toolpack_v2.5:Activating_the_Configuration|Activating the Configuration]]
+
*[[Toolpack:Restoring a Database Backup A|Restoring a Database Backup]]
−
**[[Toolpack_v2.5:Status_Menus:Applications|Verifying status]]
+
  
 +
|-
 +
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | (Topic E) <br>Configure IP Interfaces
 +
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | (Topic F) <br>Minor Package Upgrade
 +
|-
 
| valign="top" |  
 
| valign="top" |  
−
* [[Toolpack_v2.5:Database_Backup|Carrying out a First Database Backup]]
+
*[[Toolpack_v2.5:Configuring_IP_Interfaces|Configure IP Interfaces]]
 +
| valign="top" |
 +
*[[Toolpack:Downloading_a_Release_A|Retrieving a software release]]
 +
*[[Toolpack:Uploading_a_Release_A|Uploading a software release]]
 +
*[[Toolpack:Activating_a_Release_A|Activating a software release]]
  
 
|}
 
|}
−
 
  
 
=ISDN-SIP Gateway Configuration=
 
=ISDN-SIP Gateway Configuration=
Line 80: Line 104:
  
  
−
'''These steps are as follows:'''
+
'''The steps are as follows:'''
  
 
*1) Log On and Create a New Configuration
 
*1) Log On and Create a New Configuration
Line 90: Line 114:
 
*7) Configure Network Access Points (NAPs)
 
*7) Configure Network Access Points (NAPs)
 
*8) Create Call Routing Rules
 
*8) Create Call Routing Rules
−
*9) Enable Call Detail Records (CDRs)
 
  
  
−
<b>'''IMPORTANT!'''</b> After completing the setup process, remember to '''activate the configuration''', as outlined in the [[Toolpack_v2.5:Web_Portal#General_Web_Portal_Applications|General Web Portal Applications section]].
+
<b>'''IMPORTANT!'''</b> After completing the setup process, remember to '''activate the configuration''', as outlined in the [[Web_Portal_Tutorial_Guide_v2.5#General_Web_Portal_Applications|General Web Portal Applications section]].
  
  
Line 108: Line 131:
 
|-
 
|-
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Connecting_to_the_Web_Server_and logging on to the web portal|Connect to the web server and log on to the Web Portal]]
+
*[[Toolpack:Connecting_to_the_Web_Server_and logging on to the web portal A|Connect to the web server and log on to the Web Portal]]
−
*[[Toolpack_v2.5:Copying_the_Default_Configuration|Copy the default configuration]]
+
*[[Toolpack:Copying_the_Default_Configuration A|Copy the default configuration]]
−
*[[Toolpack_v2.5:Creating_a_New_Gateway_Configuration|Create a new Gateway configuration]]
+
−
*[[Toolpack_v2.5:Creating_a_New_Application_Instance|Create a new application instance]]
+
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Creating_a_Line_Interface|Create a new line interface]]
+
*[[Toolpack:Creating_a_Line_Interface A|Create a new line interface]]
−
*[[Toolpack_v2.5:Creating_a_Line_Service|Create a new line service]]
+
*[[Toolpack:Creating_a_Line_Service A|Create a new line service]]
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Configuring_an_ISDN_Stack|Configure an ISDN stack]]
+
*[[Toolpack:Configuring_an_ISDN_Stack A|Configure an ISDN stack]]
−
 
+
OR<br/>
 +
*[[Configure NFAS]]
  
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Defining_a_Clocking_Source|Define a clocking source]]  
+
*[[Toolpack:Defining_a_Clocking_Source A|Define a clocking source]]  
  
 
|-
 
|-
Line 135: Line 157:
 
|-
 
|-
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Creating_a_SIP_Stack|Create a SIP stack]]
+
*[[Toolpack:Creating_an_IP_Port_Range A|Create an IP port range]]
−
*[[Toolpack_v2.5:Creating_a_SIP_Transport_Server|Create a SIP transport server]]
+
*[[Toolpack:Creating_a_SIP_Stack A|Create a SIP stack]]
−
*[[Toolpack_v2.5:Creating_a_Service_Access_Point_(SAP)|Create a service access point (SAP)]]
+
*[[Toolpack:Creating_a_SIP_Transport_Server A|Create a SIP transport server]]
 +
*[[Toolpack:Creating_a_Service_Access_Point_(SAP) A|Create a service access point (SAP)]]
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Accessing_Codec_and_Tone_Detection_Profiles_and_Validating_Settings|Access profiles and validate settings]]
+
*[[Toolpack:Accessing_Codec_and_Tone_Detection_Profiles_and_Validating_Settings A|Access profiles and validate settings]]
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Allocating_an_ISDN_Network_Access_Point_(NAP)|Allocate an ISDN NAP]]
+
*[[Toolpack:Allocating_an_ISDN_Network_Access_Point_(NAP) A|Allocate an ISDN NAP]]
−
*[[Toolpack_v2.5:Allocating_a_SIP_Network_Access_Point_(NAP)|Allocate a SIP NAP]]
+
*[[Toolpack:Allocating_a_SIP_Network_Access_Point_(NAP) A|Allocate a SIP NAP]]
  
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Creating_a_First_Call_Route|Create a first call route]]
+
*[[Toolpack:Creating_a_First_Call_Route A|Create a first call route]]
−
|-
+
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 9) <br>Enable Call Detail Records (CDRs)
+
−
 
+
−
|-
+
−
| valign="top" |
+
−
*[[Toolpack_v2.5:Enabling_Call_Detail_Records_(CDRs)|Enable call detail records (CDRs)]]
+
−
 
+
 
|}
 
|}
−
 
  
 
=Configuring SS7=
 
=Configuring SS7=
  
−
The following table contains information on configuring [[SS7]] signaling protocol.
+
The following table contains information on configuring the [[SS7]] signaling protocol.
 
The various control layers of the [[SS7]] protocol are listed individually in each column. These layers are:
 
The various control layers of the [[SS7]] protocol are listed individually in each column. These layers are:
  
Line 181: Line 196:
 
|-
 
|-
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Creating_an_MTP2_Configuration|Create an MTP2 Configuration]]
+
*[[Toolpack:Creating_an_MTP2_Configuration A|Create an MTP2 Configuration]]
−
*[[Toolpack_v2.5:Creating_MTP2_Links|Create an MTP2 Link]]
+
*[[Toolpack:Creating_MTP2_Links A|Create an MTP2 Link]]
−
**[[Toolpack_v2.5:Status_Menus:SS7_MTP2|Verifying Status]]
+
  
  
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Creating_an_MTP3_Configuration|Create an MTP3 Configuration]]
+
*[[Toolpack:Creating_an_MTP3_Configuration A|Create an MTP3 Configuration]]
−
*[[Toolpack_v2.5:Creating_an_MTP3_Network|Create an MTP3 Network]]
+
*[[Toolpack:Creating_an_MTP3_Network A|Create an MTP3 Network]]
−
**[[Toolpack_v2.5:Creating_an_MTP3_Point_Code|Create an MTP3 Point Code]]
+
**[[Toolpack:Creating_SS7_Point_Codes A|Create an MTP3 Point Code]]
−
**[[Toolpack_v2.5:Creating_an_MTP3_Linkset|Create an MTP3 Linkset]]
+
**[[Toolpack:Creating_an_MTP3_Linkset A|Create an MTP3 Linkset]]
−
**[[Toolpack_v2.5:Creating_an_MTP3_Route|Create an MTP3 Route]]
+
***[[Toolpack:Creating_MTP3_Links A|Create MTP3 Links]]
−
**[[Toolpack_v2.5:Status_Menus:SS7_MTP3|Verifying Status]]  
+
**[[Toolpack:Creating_an_MTP3_Route A|Create an MTP3 Route]]  
  
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Creating_an_ISUP_Stack|Create an ISUP Stack]]
+
*[[Toolpack:Creating_an_ISUP_Stack A|Create an ISUP Stack]]
−
*[[Toolpack_v2.5:Creating_an_ISUP_Network|Create an ISUP Network]]
+
*[[Toolpack:Creating_an_ISUP_Network A|Create an ISUP Network]]
−
*[[Toolpack_v2.5:Creating_an_ISUP_User_Part|Create an ISUP User Part]]
+
*[[Toolpack:Creating_an_ISUP_User_Part A|Create an ISUP User Part]]
−
*[[Toolpack_v2.5:Creating_an_ISUP_Interface|Create an ISUP Interface]]
+
*[[Toolpack:Creating_an_ISUP_Interface A|Create an ISUP Interface]]
−
**[[Toolpack_v2.5:Status_Menus:SS7_ISUP|Verifying Status]]
+
−
 
+
  
  
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Creating_an_SCCP_Stack| Create an SCCP Stack]]
+
*[[Toolpack:Creating_an_SCCP_Stack A| Create an SCCP Stack]]
−
*[[Toolpack_v2.5:Creating_an_SCCP_Network|Create an SCCP Network]]
+
*[[Toolpack:Creating_an_SCCP_Network A|Create an SCCP Network]]
−
**[[Toolpack_v2.5:Creating_an_SCCP_Userpart|Create an SCCP Userpart]]
+
**[[Toolpack:Creating_an_SCCP_Userpart A|Create an SCCP Userpart]]
−
**[[Toolpack_v2.5:Creating_an_SCCP_LSAP|Create an SCCP LSAP]]
+
**[[Toolpack:Creating_an_SCCP_LSAP A|Create an SCCP LSAP]]
−
***[[Toolpack_v2.5:Creating_an_SCCP_Route|Create an SCCP Route]]
+
***[[Toolpack:Creating_an_SCCP_Route A|Create an SCCP Route]]
−
****[[Toolpack_v2.5:Creating_an_SCCP_SSN|Create an SCCP SSN]]
+
****[[Toolpack:Creating_an_SCCP_SSN A|Create an SCCP SSN]]
−
*[[Toolpack_v2.5:Creating_an_SCCP_GTT_Association|Create an SCCP GTT Association]]
+
*[[Toolpack:Creating_an_SCCP_GTT_Association A|Create an SCCP GTT Association]]
−
**[[Toolpack_v2.5:Creating_an_SCCP_GTT_Address_Map|Create an SCCP GTT Address Map]]
+
**[[Toolpack:Creating_an_SCCP_GTT_Address_Map A|Create an SCCP GTT Address Map]]
  
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Creating_a_TCAP_Stack|Create a TCAP Stack]]
+
*[[Toolpack:Creating_a_TCAP_Stack A|Create a TCAP Stack]]
−
**[[Toolpack_v2.5:Creating_a_TCAP_Userpart| Create a TCAP Userpart]]
+
**[[Toolpack:Creating_a_TCAP_Userpart A| Create a TCAP Userpart]]
−
*[[Toolpack_v2.5:Activating_the_Configuration|Activating the Configuration]]
+
*[[Toolpack:Activating_the_Configuration A|Activating the Configuration]]
  
  
Line 230: Line 242:
  
  
−
*[[M2UA]] system. See columns '''(B)''' and '''(C)''' below. An M2UA system on a Signalling Gateway Controller interfaces with an M2UA system on a Media Gateway Controller: In this configuration, M2UA bridges the SS7 MTP2 layer of a Signalling Gateway, across an IP network, with the SS7 MTP3 layer of a Media Gateway Controller.
+
*[[M2UA]] system. See columns '''(B)''' and '''(C)''' below. An M2UA system on a Signalling Gateway Controller interfaces with an M2UA system on a Media Gateway Controller. In this configuration, M2UA bridges the SS7 MTP2 layer of a Signalling Gateway, across an IP network, with the SS7 MTP3 layer of a Media Gateway Controller.
 +
 
 +
 
 +
*[[IUA]] system. See column '''(D)''' below. An IUA system on a Signalling Gateway Controller interfaces with an IUA system on a Media Gateway Controller. In this configuration, IUA bridges the SS7 MTP2 layer of a Signalling Gateway, across an IP network, with the SS7 MTP3 layer of a Media Gateway Controller.
  
 
   
 
   
−
*[[M3UA]] system on two IP signalling points. See column '''(D''') below. In this configuration the SS7 MTP2 and MTP3 layers are replaced entirely by the SIGTRAN M3UA layer. This application is typically used between two IP Signalling Points.
+
*[[M3UA]] system on two IP signalling points. See column '''(E''') below. In this configuration the SS7 MTP2 and MTP3 layers are replaced entirely by the SIGTRAN M3UA layer. This application is typically used between two IP Signalling Points.
  
 
   
 
   
−
*[[M3UA]] system. See columns '''(E)''' and '''(F)''' below. An M3UA system on a Signalling Gateway Process interfaces with an M3UA system on an Application Server Process: In this configuration, the MTP3 links is extended across the IP network.
+
*[[M3UA]] system. See columns '''(F)''' and '''(G)''' below. An M3UA system on a Signalling Gateway Process interfaces with an M3UA system on an Application Server Process. In this configuration, the MTP3 links are extended across the IP network.
  
 
<br> '''A SIGTRAN scenario walkthrough is provided in the table columns below, to illustrate the order that must be followed when configuring SIGTRAN.''' <br>  
 
<br> '''A SIGTRAN scenario walkthrough is provided in the table columns below, to illustrate the order that must be followed when configuring SIGTRAN.''' <br>  
Line 245: Line 260:
 
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario B) <br>Configuring an M2UA System on a Signalling Gateway  
 
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario B) <br>Configuring an M2UA System on a Signalling Gateway  
 
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario C) <br>Configuring an M2UA System on a Media Gateway Controller  
 
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario C) <br>Configuring an M2UA System on a Media Gateway Controller  
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario D) <br>Configuring an M3UA System on IP Signalling Points  
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario D) <br>Configuring an IUA System on a Signalling Gateway
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario E) <br>Configuring an M3UA System on a Signalling Gateway  
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario E) <br>Configuring an M3UA System on IP Signalling Points  
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario F) <br>Configuring an M3UA System on an Application Server
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario F) <br>Configuring an M3UA System on a Signalling Gateway  
 +
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Scenario G) <br>Configuring an M3UA System on an Application Server
 
|-
 
|-
 
|  
 
|  
−
*[[Toolpack v2.5:Adding an Adapter|Adding an Adapter]]  
+
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]  
−
*[[Toolpack v2.5:Creating a Line Interface|Create Line Interfaces]]  
+
*[[Toolpack:Creating a Line Interface A|Create Line Interfaces]]  
−
*[[Toolpack v2.5:Creating a Line Service|Create Line services]]  
+
*[[Toolpack:Creating a Line Service A|Create Line services]]  
−
*[[Toolpack v2.5:Editing the SCTP Configuration|Edit the SCTP Configuration]]  
+
*[[Toolpack:Creating the SCTP Configuration A|Edit the SCTP Configuration]]  
−
*[[Toolpack v2.5:Creating the M2PA Configuration|Create an M2PA Configuration]]  
+
*[[Toolpack:Creating the M2PA Configuration A|Create an M2PA Configuration]]  
−
**[[Toolpack v2.5:Creating an M2PA SAP|Create an M2PA SAP]]  
+
**[[Toolpack:Creating an M2PA SAP A|Create an M2PA SAP]]  
−
**[[Toolpack v2.5:Adding M2PA Links|Add M2PA Links]]  
+
**[[Toolpack:Adding M2PA Links A|Add M2PA Links]]  
−
*[[Toolpack v2.5:Creating SS7 Point Codes|Create SS7 Point Codes]]  
+
*[[Toolpack:Creating SS7 Point Codes A|Create SS7 Point Codes]]  
−
*[[Toolpack v2.5:Creating an MTP3 Configuration|Create an MTP3 Configuration]]  
+
*[[Toolpack:Creating an MTP3 Configuration A|Create an MTP3 Configuration]]  
−
**[[Toolpack v2.5:Creating an MTP3 Network|Create an MTP3 Network]]  
+
**[[Toolpack:Creating an MTP3 Network A|Create an MTP3 Network]]  
−
**[[Toolpack v2.5:Creating an MTP3 Linkset|Create an MTP3 Linkset]]  
+
**[[Toolpack:Creating an MTP3 Linkset A|Create an MTP3 Linkset]]  
−
***[[Toolpack v2.5:Creating MTP3 Links (M2PA)|Create MTP3 Links]]  
+
***[[Toolpack:Creating MTP3 Links (M2PA) A|Create MTP3 Links]]  
−
**[[Toolpack v2.5:Creating an MTP3 Route|Create an MTP3 Route]]  
+
**[[Toolpack:Creating an MTP3 Route A|Create an MTP3 Route]]  
−
*[[Toolpack v2.5:Creating an ISUP Stack|Create an ISUP Stack]]  
+
*[[Toolpack:Creating an ISUP Stack A|Create an ISUP Stack]]  
−
**[[Toolpack v2.5:Creating an ISUP Network|Create an ISUP Network]]  
+
**[[Toolpack:Creating an ISUP Network A|Create an ISUP Network]]  
−
**[[Toolpack v2.5:Creating an ISUP User Part|Create an ISUP User Part]]  
+
**[[Toolpack:Creating an ISUP User Part A|Create an ISUP User Part]]  
−
**[[Toolpack v2.5:Creating an ISUP Interface|Create an ISUP Interface]]  
+
**[[Toolpack:Creating an ISUP Interface A|Create an ISUP Interface]]  
−
***[[Toolpack v2.5:Creating ISUP CIC Groups|Create ISUP CIC Groups]]  
+
***[[Toolpack:Creating ISUP CIC Groups A|Create ISUP CIC Groups]]  
−
**[[Toolpack v2.5:Creating a NAP (SIGTRAN)|Create a NAP]]
+
**[[Toolpack:Creating a NAP (SIGTRAN) A|Create a NAP]]
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack v2.5:Adding an Adapter|Adding an Adapter]]  
+
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]  
−
*[[Toolpack v2.5:Creating a Line Interface|Create Line Interfaces]]  
+
*[[Toolpack:Creating a Line Interface A|Create Line Interfaces]]  
−
*[[Toolpack v2.5:Creating a Line Service|Create Line services]]  
+
*[[Toolpack:Creating a Line Service A|Create Line services]]  
−
*[[Toolpack v2.5:Creating an MTP2 Configuration|Create an MTP2 Configuration]]  
+
*[[Toolpack:Creating an MTP2 Configuration A|Create an MTP2 Configuration]]  
−
**[[Toolpack v2.5:Creating MTP2 Links|Create MTP2 Links]]  
+
**[[Toolpack:Creating MTP2 Links A|Create MTP2 Links]]  
−
*[[Toolpack v2.5:Creating the SCTP Configuration|Edit the SCTP Configuration]]  
+
*[[Toolpack:Creating the SCTP Configuration A|Edit the SCTP Configuration]]  
−
*[[Toolpack v2.5:Creating the M2UA Configuration|Create an M2UA Configuration]]  
+
*[[Toolpack:Creating the M2UA Configuration A|Create an M2UA Configuration]]  
−
**[[Toolpack v2.5:Creating an M2UA SAP|Create an M2UA SAP]]  
+
**[[Toolpack:Creating an M2UA SAP A|Create an M2UA SAP]]  
−
**[[Toolpack v2.5:Creating an M2UA Cluster|Create an M2UA Cluster]]  
+
**[[Toolpack:Creating an M2UA Cluster A|Create an M2UA Cluster]]  
−
**[[Toolpack v2.5:Creating M2UA Links|Create M2UA Links]]  
+
**[[Toolpack:Creating M2UA Links A|Create M2UA Links]]  
−
**[[Toolpack v2.5:Creating M2UA Peers|Create M2UA Peers]]
+
**[[Toolpack:Creating M2UA Peers A|Create M2UA Peers]]
  
 
<br>  
 
<br>  
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack v2.5:Adding an Adapter|Adding an Adapter]]  
+
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]  
−
*[[Toolpack v2.5:Editing the SCTP Configuration|Edit the SCTP Configuration]]  
+
*[[Toolpack:Creating the SCTP Configuration A|Edit the SCTP Configuration]]  
−
*[[Toolpack v2.5:Creating the M2UA Configuration|Create an M2UA Configuration]]  
+
*[[Toolpack:Creating the M2UA Configuration A|Create an M2UA Configuration]]  
−
**[[Toolpack v2.5:Creating an M2UA SAP|Create an M2UA SAP]]  
+
**[[Toolpack:Creating an M2UA SAP A|Create an M2UA SAP]]  
−
**[[Toolpack v2.5:Creating an M2UA Cluster|Create an M2UA Cluster]]  
+
**[[Toolpack:Creating an M2UA Cluster A|Create an M2UA Cluster]]  
−
**[[Toolpack v2.5:Creating M2UA Links|Create M2UA Links]]  
+
**[[Toolpack:Creating M2UA Links A|Create M2UA Links]]  
−
**[[Toolpack v2.5:Creating M2UA Peers|Create M2UA Peers]]  
+
**[[Toolpack:Creating M2UA Peers A|Create M2UA Peers]]  
−
*[[Toolpack v2.5:Creating SS7 Point Codes|Create SS7 Point Codes]]  
+
*[[Toolpack:Creating SS7 Point Codes A|Create SS7 Point Codes]]  
−
*[[Toolpack v2.5:Creating an MTP3 Configuration|Create an MTP3 Configuration]]  
+
*[[Toolpack:Creating an MTP3 Configuration A|Create an MTP3 Configuration]]  
−
**[[Toolpack v2.5:Creating an MTP3 Network|Create an MTP3 Network]]  
+
**[[Toolpack:Creating an MTP3 Network A|Create an MTP3 Network]]  
−
**[[Toolpack v2.5:Creating an MTP3 Linkset|Create an MTP3 Linkset]]  
+
**[[Toolpack:Creating an MTP3 Linkset A|Create an MTP3 Linkset]]  
−
**[[Toolpack v2.5:Creating MTP3 Links (M2UA)|Create MTP3 Links]]  
+
**[[Toolpack:Creating MTP3 Links (M2UA) A|Create MTP3 Links]]  
−
**[[Toolpack v2.5:Creating an MTP3 Route|Create an MTP3 Route]]  
+
**[[Toolpack:Creating an MTP3 Route A|Create an MTP3 Route]]  
−
*[[Toolpack v2.5:Creating an ISUP Stack|Create an ISUP Stack]]  
+
*[[Toolpack:Creating an ISUP Stack A|Create an ISUP Stack]]  
−
**[[Toolpack v2.5:Creating an ISUP Network|Create an ISUP Network]]  
+
**[[Toolpack:Creating an ISUP Network A|Create an ISUP Network]]  
−
**[[Toolpack v2.5:Creating an ISUP User Part|Create an ISUP User Part]]  
+
**[[Toolpack:Creating an ISUP User Part A|Create an ISUP User Part]]  
−
**[[Toolpack v2.5:Creating an ISUP Interface|Create an ISUP Interface]]  
+
**[[Toolpack:Creating an ISUP Interface A|Create an ISUP Interface]]  
−
***[[Toolpack v2.5:Creating ISUP CIC Groups|Create ISUP CIC Groups]]  
+
***[[Toolpack:Creating ISUP CIC Groups A|Create ISUP CIC Groups]]  
−
**[[Toolpack v2.5:Creating a NAP (SIGTRAN)|Create a NAP]]
+
**[[Toolpack:Creating a NAP (SIGTRAN) A|Create a NAP]]
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack v2.5:Adding an Adapter|Adding an Adapter]]  
+
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]  
−
*[[Toolpack v2.5:Editing the SCTP Configuration|Edit the SCTP Configuration]]  
+
*[[Toolpack:Creating a Line Interface A|Create Line Interfaces]]  
−
*[[Toolpack v2.5:Creating SS7 Point Codes|Create SS7 Point Codes]]  
+
*[[Toolpack:Creating a Line Service A|Create Line services]]  
−
*[[Toolpack v2.5:Creating an M3UA Configuration (IPSP)|Create an M3UA Configuration]]  
+
*[[Toolpack:Creating the SCTP Configuration A|Edit the SCTP Configuration]]  
−
**[[Toolpack v2.5:Creating an M3UA SAP|Create an M3UA SAP]]  
+
*[[Toolpack:Creating the IUA Configuration A|Create an IUA Configuration]]  
−
**[[Toolpack v2.5:Creating an M3UA Network|Create an M3UA Network]]  
+
**[[Toolpack:Creating an IUA SAP A|Create an IUA SAP]]  
−
**[[Toolpack v2.5:Creating an M3UA User Part|Create an M3UA User Part]]  
+
**[[Toolpack:Creating an IUA Cluster A|Create an IUA Cluster]]  
−
**[[Toolpack v2.5:Creating an M3UA Peer Signalling Process (IPSP)|Create an M3UA Peer Signalling Process]]  
+
**[[Toolpack:Creating IUA Links A|Create IUA Links]]  
−
**[[Toolpack v2.5:Creating an M3UA Peer Server|Create an M3UA Peer Server]]  
+
**[[Toolpack:Creating IUA Peers A|Create IUA Peers]]
−
**[[Toolpack v2.5:Creating an M3UA Route|Create an M3UA Route]]
+
 
−
*[[Toolpack v2.5:Creating an ISUP Stack|Create an ISUP Stack]]
+
<br>
−
**[[Toolpack v2.5:Creating an ISUP Network|Create an ISUP Network]]
+
−
**[[Toolpack v2.5:Creating an ISUP User Part|Create an ISUP User Part]]
+
−
**[[Toolpack v2.5:Creating an ISUP Interface|Create an ISUP Interface]]
+
−
***[[Toolpack v2.5:Creating ISUP CIC Groups|Create ISUP CIC Groups]]
+
−
**[[Toolpack v2.5:Creating a NAP (SIGTRAN)|Create a NAP]]
+
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack v2.5:Adding an Adapter|Adding an Adapter]]  
+
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]  
−
*[[Toolpack v2.5:Creating a Line Interface|Create Line Interfaces]]
+
*[[Toolpack:Creating the SCTP Configuration A|Edit the SCTP Configuration]]  
−
*[[Toolpack v2.5:Creating an MTP2 Configuration|Create an MTP2 Configuration]]
+
*[[Toolpack:Creating SS7 Point Codes A|Create SS7 Point Codes]]  
−
*[[Toolpack v2.5:Creating MTP2 Links|Create MTP2 Links]]
+
*[[Toolpack:Creating an M3UA Configuration (IPSP) A|Create an M3UA Configuration]]  
−
*[[Toolpack v2.5:Editing the SCTP Configuration|Edit the SCTP Configuration]]  
+
**[[Toolpack:Creating an M3UA SAP A|Create an M3UA SAP]]  
−
*[[Toolpack v2.5:Creating SS7 Point Codes|Create SS7 Point Codes]]  
+
**[[Toolpack:Creating an M3UA Network A|Create an M3UA Network]]  
−
*[[Toolpack v2.5:Creating an MTP3 Configuration|Create an MTP3 Configuration]]  
+
**[[Toolpack:Creating an M3UA User Part A|Create an M3UA User Part]]  
−
**[[Toolpack v2.5:Creating an MTP3 Network|Create an MTP3 Network]]  
+
**[[Toolpack:Creating an M3UA Peer Signalling Process (IPSP) A|Create an M3UA Peer Signalling Process]]  
−
**[[Toolpack v2.5:Creating an MTP3 Linkset|Create an MTP3 Linkset]]  
+
**[[Toolpack:Creating an M3UA Peer Server A|Create an M3UA Peer Server]]  
−
**[[Toolpack v2.5:Creating MTP3 Links (M3UA)|Create MTP3 Links]]  
+
**[[Toolpack:Creating an M3UA Route A|Create an M3UA Route]]
−
**[[Toolpack v2.5:Creating an MTP3 Route|Create an MTP3 Route]]  
+
*[[Toolpack:Creating an ISUP Stack A|Create an ISUP Stack]]  
−
*[[Toolpack v2.5:Creating an M3UA Configuration (SGP)|Create an M3UA Configuration]]  
+
**[[Toolpack:Creating an ISUP Network A|Create an ISUP Network]]  
−
**[[Toolpack v2.5:Creating an M3UA SAP|Create an M3UA SAP]]  
+
**[[Toolpack:Creating an ISUP User Part A|Create an ISUP User Part]]  
−
**[[Toolpack v2.5:Creating an M3UA Network|Create an M3UA Network]]  
+
**[[Toolpack:Creating an ISUP Interface A|Create an ISUP Interface]]  
−
**[[Toolpack v2.5:Creating an M3UA User Part|Create an M3UA User Part]]  
+
***[[Toolpack:Creating ISUP CIC Groups A|Create ISUP CIC Groups]]  
−
**[[Toolpack v2.5:Creating an M3UA Peer Signalling Process (SGP)|Create an M3UA Peer Signalling Process]]  
+
**[[Toolpack:Creating a NAP (SIGTRAN) A|Create a NAP]]
−
**[[Toolpack v2.5:Creating an M3UA Peer Server|Create an M3UA Peer Server]]  
+
−
**[[Toolpack v2.5:Creating an M3UA Route (SGP)|Create an M3UA Route]]<br>
+
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack v2.5:Adding an Adapter|Adding an Adapter]]  
+
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]  
−
*[[Toolpack v2.5:Editing the SCTP Configuration|Edit the SCTP Configuration]]  
+
*[[Toolpack:Creating a Line Interface A|Create Line Interfaces]]
−
*[[Toolpack v2.5:Creating SS7 Point Codes|Create SS7 Point Codes]]  
+
*[[Toolpack:Creating an MTP2 Configuration A|Create an MTP2 Configuration]]
−
*[[Toolpack v2.5:Creating an M3UA Configuration (ASP)|Create an M3UA Configuration]]  
+
*[[Toolpack:Creating MTP2 Links A|Create MTP2 Links]]
−
**[[Toolpack v2.5:Creating an M3UA SAP|Create an M3UA SAP]]  
+
*[[Toolpack:Creating the SCTP Configuration A|Edit the SCTP Configuration]]
−
**[[Toolpack v2.5:Creating an M3UA Network|Create an M3UA Network]]  
+
*[[Toolpack:Creating SS7 Point Codes A|Create SS7 Point Codes]]
−
**[[Toolpack v2.5:Creating an M3UA User Part|Create an M3UA User Part]]  
+
*[[Toolpack:Creating an MTP3 Configuration A|Create an MTP3 Configuration]]
−
**[[Toolpack v2.5:Creating an M3UA Peer Signalling Process (ASP)|Create an M3UA Peer Signalling Process]]  
+
**[[Toolpack:Creating an MTP3 Network A|Create an MTP3 Network]]
−
**[[Toolpack v2.5:Creating an M3UA Peer Server|Create an M3UA Peer Server]]  
+
**[[Toolpack:Creating an MTP3 Linkset A|Create an MTP3 Linkset]]
−
**[[Toolpack v2.5:Creating an M3UA Route|Create an M3UA Route]]  
+
**[[Toolpack:Creating MTP3 Links (M3UA) A|Create MTP3 Links]]
−
*[[Toolpack v2.5:Creating an ISUP Stack|Create an ISUP Stack]]  
+
**[[Toolpack:Creating an MTP3 Route A|Create an MTP3 Route]]
−
**[[Toolpack v2.5:Creating an M3UA ISUP Network|Create an M3UA ISUP Network]]  
+
*[[Toolpack:Creating an M3UA Configuration (SGP) A|Create an M3UA Configuration]]
−
**[[Toolpack v2.5:Creating an ISUP User Part|Create an ISUP User Part]]  
+
**[[Toolpack:Creating an M3UA SAP A|Create an M3UA SAP]]
−
**[[Toolpack v2.5:Creating an ISUP Interface|Create an ISUP Interface]]  
+
**[[Toolpack:Creating an M3UA Network A|Create an M3UA Network]]
−
***[[Toolpack v2.5:Creating ISUP CIC Groups|Create ISUP CIC Groups]]  
+
**[[Toolpack:Creating an M3UA User Part A|Create an M3UA User Part]]
−
**[[Toolpack v2.5:Creating a NAP (SIGTRAN)|Create a NAP]]
+
**[[Toolpack:Creating an M3UA Peer Signalling Process (SGP) A|Create an M3UA Peer Signalling Process]]
 +
**[[Toolpack:Creating an M3UA Peer Server A|Create an M3UA Peer Server]]
 +
**[[Toolpack:Creating an M3UA Route (SGP) A|Create an M3UA Route]]<br>
 +
 
 +
| valign="top" |
 +
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]
 +
*[[Toolpack:Creating the SCTP Configuration A|Edit the SCTP Configuration]]  
 +
*[[Toolpack:Creating SS7 Point Codes A|Create SS7 Point Codes]]  
 +
*[[Toolpack:Creating an M3UA Configuration (ASP) A|Create an M3UA Configuration]]  
 +
**[[Toolpack:Creating an M3UA SAP A|Create an M3UA SAP]]  
 +
**[[Toolpack:Creating an M3UA Network A|Create an M3UA Network]]  
 +
**[[Toolpack:Creating an M3UA User Part A|Create an M3UA User Part]]  
 +
**[[Toolpack:Creating an M3UA Peer Signalling Process (ASP) A|Create an M3UA Peer Signalling Process]]  
 +
**[[Toolpack:Creating an M3UA Peer Server A|Create an M3UA Peer Server]]  
 +
**[[Toolpack:Creating an M3UA Route A|Create an M3UA Route]]  
 +
*[[Toolpack:Creating an ISUP Stack A|Create an ISUP Stack]]  
 +
**[[Toolpack:Creating an M3UA ISUP Network A|Create an M3UA ISUP Network]]  
 +
**[[Toolpack:Creating an ISUP User Part A|Create an ISUP User Part]]  
 +
**[[Toolpack:Creating an ISUP Interface A|Create an ISUP Interface]]  
 +
***[[Toolpack:Creating ISUP CIC Groups A|Create ISUP CIC Groups]]  
 +
**[[Toolpack:Creating a NAP (SIGTRAN) A|Create a NAP]]
  
 
|}
 
|}
−
 
  
 
=Configuring CAS R2=
 
=Configuring CAS R2=
Line 375: Line 403:
 
|-
 
|-
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack v2.5:Adding an Adapter|Adding an Adapter]]  
+
*[[Toolpack:Adding an Adapter A|Adding an Adapter]]  
−
*[[Toolpack_v2.5:Creating_a_Line_Interface|Create Line Interfaces]]  
+
*[[Toolpack:Creating_a_Line_Interface A|Create Line Interfaces]]  
−
*[[Toolpack_v2.5:Creating_a_Line_Service|Create Line services]]  
+
*[[Toolpack:Creating_a_Line_Service A|Create Line services]]  
−
*[[Toolpack v2.5:Copy variant script|Copy variant script]] (optional)
+
*[[Toolpack:Copy variant script A|Copy variant script]]
−
*[[Toolpack v2.5:Create CAS R2 stack|Create CAS R2 stack]]  
+
*[[Toolpack:Create CAS R2 stack A|Create CAS R2 stack]]
−
*[[Toolpack_v2.5:Creating_a_NAP|Create a NAP]]
+
*[[Toolpack:Setting CAS R2 BACK DIGITS variable A|Set backward digits string]]
 +
*[[Toolpack:Creating_a_CAS_R2_NAP A|Create a NAP]]
  
 
|}
 
|}
−
 
  
 
=Configuring H.248=
 
=Configuring H.248=
  
 
The following table contains steps for configuring an H.248 media gateway control protocol
 
The following table contains steps for configuring an H.248 media gateway control protocol
 +
  
 
{| cellpadding="5" border="1" class="wikitable"
 
{| cellpadding="5" border="1" class="wikitable"
Line 398: Line 427:
 
|-
 
|-
 
| valign="top" |
 
| valign="top" |
−
*[[Toolpack_v2.5:Adding_an_Adapter|Adding an Adapter]]
+
*[[Toolpack:Adding_an_Adapter A|Adding an Adapter]]
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Creating_a_Line_Interface|Create line interfaces]]
+
*[[Toolpack:Creating_a_Line_Interface A|Create line interfaces]]
−
*[[Toolpack_v2.5:Creating_a_Line_Service|Create line services]]
+
*[[Toolpack:Creating_a_Line_Service A|Create line services]]
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Creating_an_IP_Port_Range|Create IP port ranges]]
+
*[[Toolpack:Creating_an_IP_Port_Range A|Create IP port ranges]]
  
  
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Allocating_an_ISDN_Network_Access_Point_(NAP)|Allocate an ISDN network access point (NAP)]]
+
*[[Toolpack:Allocating_a_VoIP_Network_Access_Point_(NAP) A|Allocate a VoIP network access point (NAP)]]
−
*[[Toolpack_v2.5:Allocating_a_SIP_Network_Access_Point_(NAP)|Allocate a SIP network access point (NAP)]]
+
*[[Toolpack:Allocating_a_TDM_Network_Access_Point_(NAP) A|Allocate a TDM network access point (NAP)]]
  
  
 
|-
 
|-
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 5) <br>Create an H.248 Configuration
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 5) <br>Configure the Media Gateway for H.248 mode
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 6) <br>Add a New Media Gateway Controller
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 6) <br>Create an H.248 Configuration
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 7) <br>
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 7) <br>Add a New Media Gateway Controller
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 8) <br>
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 8) <br>Associate NAPs with the H.248 Configuration
 +
  
−
|-
 
−
| valign="top" |
 
−
*[[Toolpack_v2.5:Creating_an_H.248_Configuration|Create a new H.248 configuration]]
 
  
 +
|-
 
| valign="top" |  
 
| valign="top" |  
−
*[[Toolpack_v2.5:Adding_a_Media_Gateway_Controller_(MGC)|Add a new media gateway controller (MGC)]]
+
*[[Toolpack:Configure the Media_Gateway_for_H248_Mode A|Configure the Media Gateway for H.248 mode]]
  
 +
| valign="top" |
 +
*[[Toolpack:Creating_an_H.248_Configuration A|Create a new H.248 configuration]]
  
 
| valign="top" |  
 
| valign="top" |  
 +
*[[Toolpack:Adding_a_Media_Gateway_Controller_(MGC) A|Add a new media gateway controller (MGC)]]
  
 +
| valign="top" |
 +
*[[Toolpack:Associating_NAPs_with_an_H.248_Configuration A|Associate the NAPs with the H.248 configuration]]
  
 +
|-
 +
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 9) <br>Select Timeslots for TDM Terminations
 +
 +
|-
 
| valign="top" |
 
| valign="top" |
 +
*[[Toolpack:Selecting_Timeslots_for_TDM_Interfaces A|Select timeslots for the TDM interfaces]]
 
|}
 
|}
  
−
=Configuring an H.323 to SIP Converter=
+
=Configuring SNMP=
  
−
The following table contains steps for configuring a YATE H.323 to SIP signal converter:
+
To use the Simple Network Management Protocol (SNMP)on your machine, you must first configure the '''tbSnmpAgent'''.
 +
<br/>The '''tbSnmpAgent''' is a software application that interfaces between the TMedia system hardware and the [http://www.net-snmp.org NetSnmp] implementation of the SNMP that is supported by TelcoBridges.
 +
By default, tbSnmpAgent is '''disabled'''. In order to use the SNMP protocol to monitor and manage your hardware, complete the following tasks:
 +
<br/>
 +
* Activate the tbSnmpAgent
 +
* Configure the tbSnmpAgent as required
 +
<br/>
 +
These tasks can be completed using the [[Web Portal]]:
 +
<br/>
 +
#[[Activating tbSnmpAgent|Activate tbSnmpAgent]]
 +
#[[Configuring tbSnmpAgent|Configure tbSNMPAGENT to suit your needs]]
 +
<br/>
 +
Once these tasks are completed, your TMedia platform is ready to expose system variables for polling with the Simple Network management Protocol (SNMP).
 +
 
 +
=Configuring RADIUS=
 +
 
 +
Toolpack v2.5 can send accounting requests containing CDR data to a remote RADIUS server. In order to do so, refer to the [[Toolpack:Configuring_RADIUS A|Configuring RADIUS]] page.
 +
 
 +
=Configuring Fax=
  
 
{| cellpadding="5" border="1" class="wikitable"
 
{| cellpadding="5" border="1" class="wikitable"
 
|-
 
|-
−
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | <br> Configuring an H.323 to SIP Signal Converter
+
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" |FAX passthrough
 +
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" |FAX T.38
 +
|-
 +
| valign="top" |
 +
*[[Configure_Fax_Relay_A|Configure Fax Relay]]
 +
*[[Configure_Fax_Passthrough_A|Configure Fax Passthrough]]
 +
| valign="top" |
 +
*[[Configure_Fax_Relay_A|Configure Fax Relay]]
 +
*[[Configure_Fax_T38_A|Configure Fax T38]]
 +
|}
  
 +
=Configuring Routing script=
 +
TelcoBridges provides a wide variety of routing script examples which customers can apply directly in their web configuration according to their needs by following just a few simple steps. Please select one of the following examples according to your needs. You may modify it when necessary.
 +
 +
 +
'''*Flexible NOA:''' Remap the Calling/Called NOA flexibly based on the routes. It should cover most of the NOA requests since the routes include the calling/called remapping as well.
 +
 +
'''*Prefix NOA:''' Remapp Calling/Called NOA according to the prefix of the calling/called number, manipulate calling/called number. For calling number, if it is a privacy call, use the number in P-Asserted-Identity line or Remote-Party-ID line as the calling number to remap the NOA and do the manipulation.
 +
 +
{| cellpadding="5" border="1" class="wikitable"
 +
|-
 +
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" |Flexible NOA
 +
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" |Prefix NOA
 
|-
 
|-
 
| valign="top" |
 
| valign="top" |
  
−
* [[Toolpack_v2.5:Attaching_YATE_routing_scripts|Attach YATE routing scripts]]
+
*[[Create_New_Routing_Script_A|Create new routing script]]
−
* [[Toolpack_v2.5:Creating_H.323_NAP_Columns|Create H.323 NAP columns]]
+
*[[Import_Customized_Routing_Script_A|Import customized routing script]]
−
* [[Toolpack_v2.5:Creating_H.323_NAPs|Create H.323 NAPs]]
+
*[[Add_NOA_Columns_in_Routes_A|Add NOA columns in routes]]
 +
*[[Enable_Routing_Script_A|Enable routing script]]
 +
*[[Activate_Configuration_A|Activate configuration]]
 +
 
 +
| valign="top" |
 +
 
 +
*[[Create_New_Routing_Script_A|Create new routing script]]
 +
*[[Import_Customized_Routing_Script_A|Import customized routing script]]
 +
*[[Enable_Routing_Script_A|Enable routing script]]
 +
*[[Activate_Configuration_A|Activate configuration]]
 +
 
 
|}
 
|}
  
Line 463: Line 550:
 
| valign="top" |
 
| valign="top" |
  
−
*[[Toolpack_v2.5:Tmedia_Status_Menus|Tmedia Status Menus]]
+
*[[Toolpack:Tmedia_Status_Menus A|Tmedia Status Menus]]
−
**[[Toolpack_v2.5:Status_Menus:Navigation|Navigation]]
+
**[[Toolpack:Status_Menus:Navigation A|Navigation]]
−
**[[Toolpack_v2.5:Status_Menus:Screen_Conventions|Status Screen Conventions]]
+
**[[Toolpack:Status_Menus:Screen_Conventions A|Status Screen Conventions]]
  
 
| valign="top" |  
 
| valign="top" |  
  
−
*[[Toolpack_v2.5:Status_Menus:System|System]]
+
*[[Toolpack:Status_Menus:System A|System]]
−
*[[Toolpack_v2.5:Status_Menus:Adapters_and_IP_Interfaces|Adapters and IP Interfaces]]
+
*[[Toolpack:Status_Menus:Adapters_and_IP_Interfaces A|Adapters and IP Interfaces]]
−
*[[Toolpack_v2.5:Status_Menus:Hosts|Hosts]]
+
*[[Toolpack:Status_Menus:Hosts A|Hosts]]
−
*[[Toolpack_v2.5:Status_Menus:Applications|Applications]]
+
*[[Toolpack:Status_Menus:Applications A|Applications]]
−
*[[Toolpack_v2.5:Status_Menus:TDM_Lines|TDM Lines]]
+
*[[Toolpack:Status_Menus:TDM_Lines A|TDM Lines]]
−
*[[Toolpack_v2.5:Status_Menus:SS7_MTP2|SS7 MTP2]]
+
*[[Toolpack:Status_Menus:SCTP A|SCTP]]
−
*[[Toolpack_v2.5:Status_Menus:SS7_MTP3|SS7 MTP3]]
+
*[[Toolpack:Status_Menus:SS7_MTP2 A|SS7 MTP2]]
−
*[[Toolpack_v2.5:Status_Menus:SS7_ISUP|SS7 ISUP]]
+
*[[Toolpack:Status_Menus:SS7_M2UA A|SS7 M2UA]]
−
*[[Toolpack_v2.5:Status_Menus:ISDN|ISDN]]
+
*[[Toolpack:Status_Menus:SS7_IUA A|SS7 IUA]]
−
*[[Toolpack_v2.5:Status_Menus:SIP|SIP]]
+
*[[Toolpack:Status_Menus:SS7_M2PA A|SS7 M2PA]]
−
*[[Toolpack_v2.5:Status_Menus:NAP|NAP]]
+
*[[Toolpack:Status_Menus:SS7_M3UA A|SS7 M3UA]]
−
*[[Toolpack_v2.5:Status_Menus:CDR|CDR]]
+
*[[Toolpack:Status_Menus:SS7_MTP3 A|SS7 MTP3]]
 +
*[[Toolpack:Status_Menus:SS7_ISUP A|SS7 ISUP]]
 +
*[[Toolpack:Status_Menus:SS7_SCCP A|SS7 SCCP]]
 +
*[[Toolpack:Status_Menus:SS7_TCAP A|SS7 TCAP]]
 +
*[[Toolpack:Status_Menus:ISDN A|ISDN]]
 +
**[[Toolpack:Status_Menus:NFAS A|NFAS]]
 +
*[[Toolpack:Status_Menus:CAS R2 A|CAS R2]]
 +
*[[Toolpack:Status_Menus:SIP A|SIP]]
 +
*[[Toolpack:Status_Menus:Clock A|Clock]]
 +
*[[Toolpack:Status_Menus:TMS A|TMS]]
 +
*[[Toolpack:Status_Menus:NAP A|NAP]]
 +
*[[Toolpack:Status_Menus:H.248 A|H.248]]
  
 
|}
 
|}
−
 
−
=Further Reading=
 
−
For further information, refer to the following reading list. Please note that all guides listed below are in portable document format (*.PDF), and can be downloaded:
 
−
 
−
*[[media:TMedia System Architecture Description.pdf|TMedia System Architecture Overview for Developers of VoIP and TDM Solutions]]
 
−
*[[Media:Tb640 user's guide.pdf|TB640 User's Guide]]
 
−
*[[media:SS7 user's guide.pdf|TelcoBridges SS7 User's Guide]]
 
−
*[[media:Tb640 sip user's guide.pdf|SIP User’s Guide]]
 
  
  
 
[[category:Toolpack]]
 
[[category:Toolpack]]

Latest revision as of 14:44, 27 June 2013

Contents

Introduction

This guide is designed to provide users with a scenario-based approach to installing Tmedia and Tdev systems, using the Web Portal configuration tool. This means that users must first go through the steps that are general to all installations, and subsequently follow the instructions that are specific to their particular application scenario (this corresponds to the type of service, and hardware system being set up).


Prerequisites

This document assumes that the Tmedia or Tdev devices are installed as described in their Quick Reference Guides, and in the case of the Tmedia system communication has been established with the control network.

(Note: Tmedia devices are shipped with the Tmedia Web Portal pre-installed, while Tdev devices require that Toolpack be installed as described in the TMP6400 Installation Guide.)

Furthermore, in the case of a Tdev device and the initial configuration of the Toolpack application server, the following will have been provided:

  • The Tdev device to which the Web Portal will first connect.
  • The Tdev device will have been pre-configured with its physical TDM interface.
  • The serial number of the Tdev device will have been entered into the configuration file.
  • The application software for the Tdev device will have been pre-installed on the Toolpack application server, as described in the TMP6400 Installation Guide.

This document also assumes familiarity with topics, such as ISDN signaling, SIP signaling, SS7, CAS R2 signaling, and SIGTRAN signaling.


Key Concepts

  • System: A system is defined as the complete solution that is designed for a network. If a system solution is comprised of 4 TMP6400’s and a TMS1600, then the combination of these TelcoBridges devices is termed a system.
  • Hardware: Each TelcoBridges devices, whether it is a TMP6400, TMG3200, or TMS1600 is referred to as a hardware device or hardware adapter.
  • Line Interface: The physical TDM module installed on the TelcoBridges device is referred to as a line interface.


Web Portal Disposition

The Web Portal is divided up into eight major sections reflected in the navigation bar located on the left-hand side of the portal. These are:

  1. Status -- series of screens providing overall system status as well as the status of various active applications, services, interfaces, and protocols
  2. Users -- list of all individuals with access to the system
  3. Logs -- view or download records of system activity
  4. Backups -- create, download or restore copies of the overall system configuration data
  5. Packages -- list of installed releases of the system software
  6. Systems -- list of hardware devices and configuration settings
  7. Configurations -- list of settings that have been created for a device
  8. Gateway -- options for configuring network access points, call detail records, calling routes, etc.


Web Portal Basics

IMPORTANT! The Topics covered in the following table are common to all TMedia installations. Therefore, this section should be consulted before moving on to any other.


Topics covered here:

  • The basic knowledge needed to properly navigate through the Web Portal (A).
  • The fundamentals of user account management and permission masks (B).
  • The initial steps required for first starting the Web Portal, and verifying that it is functioning properly (C).
  • The process involved in backing up your database for the first time (D).
  • The process involved in first configuring your IP interfaces (E).


(Topic A)
Web Portal Basics 		(Topic B)
Log-on and User Access Levels 		(Topic C)
Application Start-up and Verification 		(Topic D)
Database Backup


(Topic E)
Configure IP Interfaces 		(Topic F)
Minor Package Upgrade

ISDN-SIP Gateway Configuration

The following tables contain a typical configuration scenario for an ISDN to SIP gateway. This type of installation allows for the transfer of information from traditional ISDN signaling to SIP protocol for VoIP applications. Please follow each step one after another as these are listed in logical order.


The steps are as follows:

  • 1) Log On and Create a New Configuration
  • 2) Allocate Physical Interfaces
  • 3) Configure ISDN-PRI Signaling
  • 4) Configure Clocking Source
  • 5) Configure SIP Signaling
  • 6) Configure Codecs and Tone Detection
  • 7) Configure Network Access Points (NAPs)
  • 8) Create Call Routing Rules


IMPORTANT! After completing the setup process, remember to activate the configuration, as outlined in the General Web Portal Applications section.


(Step 1)
Log On and Create a New Configuration 		(Step 2)
Allocate Physical Interfaces 		(Step 3)
Configure ISDN-PRI Signaling 		(Step 4)
Configure Clocking Source

OR
(Step 5)
Configure SIP Signaling 		(Step 6)
Configure Codecs and Tone Detection 		(Step 7)
Configure Network Access Points (NAPs) 		(Step 8)
Create Call Routing Rules

Configuring SS7

The following table contains information on configuring the SS7 signaling protocol. The various control layers of the SS7 protocol are listed individually in each column. These layers are:

  • MTP2 layer (Step 1)
  • MTP3 layer (Step 2)
  • ISUP layer (Step 3)
  • SCCP layer (Step 4)
  • TCAP layer (Step 5)

Follow the topics listed in each column from left to right in order to configure an SS7 protocol stack.

(Step 1)
Configuring the MTP2 Layer 		(Step 2)
Configuring the MTP3 Layer 		(Step 3)
Configuring the ISUP Layer 		(Step 4)
Configuring the SCCP Layer 		(Step 5)
Configuring the TCAP Layer






SIGTRAN Application Scenarios

Toolpack version 2.5 enables you to configure SIGTRAN and thereby extend SS7 signalling functionality to the IP network. Toolpack enables you to configure a number of SIGTRAN applications based upon your requirements. These applications are listed below as follows:

  • M2PA system. See column (A) below. In this configuration the SS7 MTP2 layer is replaced by the SIGTRAN M2PA layer which extends MTP2 signalling functionality into the IP network. This application is typically used between a Signalling Gateway and an IP Signalling Point, or between two IP Signalling Points.


  • M2UA system. See columns (B) and (C) below. An M2UA system on a Signalling Gateway Controller interfaces with an M2UA system on a Media Gateway Controller. In this configuration, M2UA bridges the SS7 MTP2 layer of a Signalling Gateway, across an IP network, with the SS7 MTP3 layer of a Media Gateway Controller.


  • IUA system. See column (D) below. An IUA system on a Signalling Gateway Controller interfaces with an IUA system on a Media Gateway Controller. In this configuration, IUA bridges the SS7 MTP2 layer of a Signalling Gateway, across an IP network, with the SS7 MTP3 layer of a Media Gateway Controller.


  • M3UA system on two IP signalling points. See column (E) below. In this configuration the SS7 MTP2 and MTP3 layers are replaced entirely by the SIGTRAN M3UA layer. This application is typically used between two IP Signalling Points.


  • M3UA system. See columns (F) and (G) below. An M3UA system on a Signalling Gateway Process interfaces with an M3UA system on an Application Server Process. In this configuration, the MTP3 links are extended across the IP network.


A SIGTRAN scenario walkthrough is provided in the table columns below, to illustrate the order that must be followed when configuring SIGTRAN.

(Scenario A)
Configuring an M2PA System 		(Scenario B)
Configuring an M2UA System on a Signalling Gateway 		(Scenario C)
Configuring an M2UA System on a Media Gateway Controller 		(Scenario D)
Configuring an IUA System on a Signalling Gateway 		(Scenario E)
Configuring an M3UA System on IP Signalling Points 		(Scenario F)
Configuring an M3UA System on a Signalling Gateway 		(Scenario G)
Configuring an M3UA System on an Application Server



Configuring CAS R2

Toolpack v2.5 allows you to configure CAS R2 signaling stacks. The following table lists the basic steps that must be followed in order to configure CAS R2.


Configuring a CAS R2 stack

Configuring H.248

The following table contains steps for configuring an H.248 media gateway control protocol


(Step 1)
Add a Hardware Adapter 		(Step 2)
Allocate Physical Interfaces 		(Step 3)
Create IP Port Ranges 		(Step 4)
Configure Network Access Points (NAPs)



(Step 5)
Configure the Media Gateway for H.248 mode 		(Step 6)
Create an H.248 Configuration 		(Step 7)
Add a New Media Gateway Controller 		(Step 8)
Associate NAPs with the H.248 Configuration


(Step 9)
Select Timeslots for TDM Terminations

Configuring SNMP

To use the Simple Network Management Protocol (SNMP)on your machine, you must first configure the tbSnmpAgent.
The tbSnmpAgent is a software application that interfaces between the TMedia system hardware and the NetSnmp implementation of the SNMP that is supported by TelcoBridges. By default, tbSnmpAgent is disabled. In order to use the SNMP protocol to monitor and manage your hardware, complete the following tasks:

  • Activate the tbSnmpAgent
  • Configure the tbSnmpAgent as required


These tasks can be completed using the Web Portal:

  1. Activate tbSnmpAgent
  2. Configure tbSNMPAGENT to suit your needs


Once these tasks are completed, your TMedia platform is ready to expose system variables for polling with the Simple Network management Protocol (SNMP).

Configuring RADIUS

Toolpack v2.5 can send accounting requests containing CDR data to a remote RADIUS server. In order to do so, refer to the Configuring RADIUS page.

Configuring Fax

FAX passthrough FAX T.38

Configuring Routing script

TelcoBridges provides a wide variety of routing script examples which customers can apply directly in their web configuration according to their needs by following just a few simple steps. Please select one of the following examples according to your needs. You may modify it when necessary.


*Flexible NOA: Remap the Calling/Called NOA flexibly based on the routes. It should cover most of the NOA requests since the routes include the calling/called remapping as well.

*Prefix NOA: Remapp Calling/Called NOA according to the prefix of the calling/called number, manipulate calling/called number. For calling number, if it is a privacy call, use the number in P-Asserted-Identity line or Remote-Party-ID line as the calling number to remap the NOA and do the manipulation.

Flexible NOA Prefix NOA

Status Menus

The Web Portal configuration tool will guide you through a number of status menus, each of which indicate the current state of a certain hardware service (assuming said service has been configured). The following table contains the general conventions of the Web Portal's display (A), as well as a variety of specific status menus (B).


(A)
Menus Overview 		(B)
Individual Menu Descriptions
Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Web_Portal_Tutorial_Guide_v2.5&oldid=14020"
Personal tools