SS7 User's Guide

From TBwiki

(Difference between revisions)

Latest revision as of 11:32, 15 December 2011

The following is taken from the SS7 User's Guide of September 2008. Not all content has been ported to the wiki, specifically elements that deal with Toolpack API need to be revised before they can be ported. In some cases, some of the links below point to articles that were already on the wiki. For example, as part of the Web Portal Tutorial Guide. In this case, we have merged articles from both sources to the best of our ability.

Where practical, we have also provided links to articles from the SS7 User's guide in the form of 'related actions' or 'references' that can be found at the bottom of various topical pages, such as those found in the 'glossary' available via the left-hand navigation bar on each wiki page.

SS7 User's Guide

MTP2

MTP3

Overview
- Architecture (PAGE CONTENT IS INCOMPLETE; NEED TO REVISE GRAPHICS)
- Specification
MTP3 Configuration
MTP3 States (SHOULD PROBABLY GET SCREENSHOTS LIKE FOR MTP2)
MTP3 Statistics

ISUP

Overview (NEED TO FIND A HOME FOR ALL OF THE HISTORY AT BEGINNING OF SECTION]]
- ISUP summary
- Architecture
- Configuration sequence
- Specification
ISUP Configuration
- Layout of the ISUP network
- Configuration of layer
  - General configuration
  - Network
  - Userpart
  - Interface
  - Circuits (need to clean up; also, what is the equivalent section in the Web portal tutorial guide?)
ISUP Signaling
- Host application requirements
- Information element usage
  - IE inclusion in different messages
- ISUP functions and behaviours
  - Blocking and unblocking
  - Circuit group functions
  - Flow control
  - Circuit continuity testing (VALIDATE THE CODING REFERENCES AS WELL AS WORD REFERENCES)
    - Continuity testing within a call
    - Continuity testing outside a call

SCCP

TCAP

Caveat

The signaling information/code contained in this document/product is based on the best information we have available. Although it has been tested successfully with other piece of signaling equipment, we cannot guarantee that it will conform to the usage of any particular switch in the field.

SS7 User's Guide

Latest revision as of 11:32, 15 December 2011

Contents

SS7 User's Guide

MTP2

MTP3

ISUP

SCCP

TCAP

Caveat

Views

Personal tools

Navigation

Search

Toolbox

@@ Line 1: / Line 1: @@
-UNDER CONSTRUCTION as of August 7th, 2009.
+{| class="wikitable" border="0" cellpadding="4" cellspacing="0"
+|-
+! width="300" | [[Image:Page-Under-Construction.jpg|150px]]
+! width="300" | [[Image:Page-Under-Construction.jpg|150px]]
+! width="300" | [[Image:Page-Under-Construction.jpg|150px]]
+|-
+|}
+The following is taken from the SS7 User's Guide of September 2008. Not all content has been ported to the wiki, specifically elements that deal with Toolpack API need to be revised before they can be ported. In some cases, some of the links below point to articles that were already on the wiki. For example, as part of the Web Portal Tutorial Guide. In this case, we have merged articles from both sources to the best of our ability.
-General description goes here.
+<br> Where practical, we have also provided links to articles from the SS7 User's guide in the form of 'related actions' or 'references' that can be found at the bottom of various topical pages, such as those found in the 'glossary' available via the left-hand navigation bar on each wiki page.
-== Before you begin ==
+<br>
-The signaling information/code contained in this document/product is based on the best information we have available. Although it has been tested successfully with other piece of signaling equipment, we cannot guarantee that it will conform to the usage of any particular switch in the field.
+----
-== Key concepts ==
+<br>
-*[[OSI model]]
+== SS7 User's Guide  ==
-== SS7 User's Guide ==
+=== MTP2  ===
+*[[MTP2 Layer|Overview]]
-=== MTP2 ===
+**[[MTP2:Architecture|Architecture]]
-*[[MTP2 Layer|Overview]]
+***[[MTP2:Architecture#Priorities|Priorities]]
-**[[MTP2:Architecture|Architecture]]
+***[[MTP2:Architecture#Flow_Control|Flow Control]]
-***[[MTP2:Architecture#Priorities|Priorities]]
+**[[MTP2:Specification|Specification]]
-***[[MTP2:Architecture#Flow Control|Flow Control]]
+***[[MTP2:Specification#Variants|Variants]]
-**[[MTP2:Specification|Specification]]
+*[[Toolpack v2.3:Create an MTP2 Link|MTP2 Configuration]]
-***[[MTP2:Specification#Variants|Variants]]
+**[[MTP2:Advanced parameters|Advanced parameters]]
-*[[Toolpack:Create an MTP2 Link|MTP2 Configuration]] (THERE ARE SOME PARAMETERS MISSING)
+*[[MTP2:States|MTP2 States]]
-**[[MTP2:Advanced parameters|Advanced parameters]]
-*[[MTP2:States|MTP2 States]]
 *[[MTP2:Statistics|Statistics]]
-=== MTP3 ===
+=== MTP3  ===
-*[[MTP3 Layer|Overview]] (NEED TO UDPATE LINKED PAGE WITH CONTENT FROM SS7 USER GUIDE)
-**[[MTP3:Architecture|Architecture]] (PAGE CONTENT IS INCOMPLETE; NEED TO REVISE GRAPHICS)
+*[[MTP3 Layer|Overview]]
-***[[MTP3:Addressing|Addressing]]
+**[[MTP3:Architecture|Architecture]] (PAGE CONTENT IS INCOMPLETE; NEED TO REVISE GRAPHICS)
-****[[MTP3:Addressing#Signaling Points|Signaling Points]]
+***[[MTP3:Addressing|Addressing]]
-***[[MTP3:Routing|Routing]]
+****[[MTP3:Addressing#Signaling_Points|Signaling Points]]
-***[[MTP3:Flow Control|Flow Control]]
+***[[MTP3:Routing|Routing]]
-***[[MTP3:Multiple OPC Capability|Multiple OPC Capability]]
+***[[MTP3:Flow Control|Flow Control]]
-**[[MTP3:Specification|Specification]]
+***[[MTP3:Multiple OPC Capability|Multiple OPC Capability]]
-*[[Toolpack:Create an MTP3 Configuration|MTP3 Configuration]]
+**[[MTP3:Specification|Specification]]
-**[[MTP3:Configuration of layer|Configuration of layer]] (this may not be required; could be API specific)
+*[[Toolpack:Create an MTP3 Configuration|MTP3 Configuration]]
-***[[MTP3:General Configuration|General Configuration]]
+**[[MTP3:Configuration of layer|Configuration of layer]]
-***[[MTP3:Userpart Configuration|Userpart Configuration]]
+***[[MTP3:General Configuration|General Configuration]]
-***[[Toolpack:Create an MTP3 Linkset#Description of parameters|Linkset Configuration]]
+***[[MTP3:Userpart Configuration|Userpart Configuration]]
-***[[MTP3:Link Configuration|Link Configuration]]
+***[[Toolpack:Create an MTP3 Linkset#Description_of_parameters|Linkset Configuration]]
-***[[Toolpack:Create an MTP3 Route#Description of parameters|Route Configuration]]
+***[[MTP3:Link Configuration|Link Configuration]]
-***[[MTP3:Timers|Timers]]
+***[[Toolpack:Create an MTP3 Route#Description_of_parameters|Route Configuration]]
-**[[MTP3:Link Alarms|Link Alarms]]
+***[[MTP3:Timers|Timers]]
-**[[MTP3:Linkset Alarms|Linkset Alarms]]
+**[[MTP3:Link Alarms|Link Alarms]]
-**[[MTP3:Route Alarms|Route Alarms]]
+**[[MTP3:Linkset Alarms|Linkset Alarms]]
-*[[MTP3:States|MTP3 States]]  (SHOULD PROBABLY GET SCREENSHOTS LIKE FOR MTP2)
+**[[MTP3:Route Alarms|Route Alarms]]
-**[[MTP3:Link States Get|Link States Get]]
+*[[MTP3:States|MTP3 States]] (SHOULD PROBABLY GET SCREENSHOTS LIKE FOR MTP2)
-**[[MTP3:Link States Set|Link States Set]]
+**[[MTP3:States#Link_States|Link States]]
-**[[MTP3:Route Linkset States Get|Route Linkset States Get]]
+**[[MTP3:States#Linkset_States|Linkset States]]
-**[[MTP3:Route Linkset States Set|Route Linkset States Set]]
+**[[MTP3:States#Route_States|Route States]]
-**[[MTP3:Route States Get|Route States Get]]
+*[[MTP3:Statistics|MTP3 Statistics]]
-*[[MTP3:Statistics|MTP3 Statistics]]
+**[[MTP3:Link Statistics|Link Statistics]]
-**[[MTP3:Link Statistics|Link Statistics]]
+**[[MTP3:Route Linkset Statistics|Route Linkset Statistics]]
-**[[MTP3:Route Linkset Statistics|Route Linkset Statistics]]
 **[[MTP3:Route Statistics|Route Statistics]]
-*[[MTP3:Standalone mode|MTP3 Standalone mode]]
-**[[MTP3:Standalone mode:Send Data|Send Data]]
-**[[MTP3:Standalone mode:Received Data|Received Data]]
-=== ISUP ===
+=== ISUP  ===
-*[[ISUP|Overview]] (NEED TO FIND A HOME FOR ALL OF THE HISTORY AT BEGINNING OF SECTION]]
-**ISUP summary
-**[[ISUP:Architecture|Architecture]]
-**[[ISUP:Configuration sequence|Configuration sequence]]
-**[[ISUP:Specification|Specification]]
-*ISUP Configuration
-**[[ISUP:Layout of the ISUP network|Layout of the ISUP network]]
-**[[Configuration of layer|Configuration of layer]]
-***[[ISUP:General configuration|General configuration]]
-***[[Toolpack:Create an ISUP Network|Network]] (need to add content from SS7 guide for the next three)
-***[[Toolpack:Create an ISUP User Part|Userpart]]
-***[[Toolpack:Create an ISUP Interface|Interface]]
-***[[ISUP:Circuits|Circuits]]
-*ISUP Signaling
-**[[ISUP:Host application requirements|Host application requirements]]
-***[[ISUP:General guidelines for designing an efficient call control application using ISUP|General guidelines for designing an efficient call control application using ISUP]]
-***[[ISUP:General guidelines for designing highly redundant application (blade failure)|General guidelines for designing highly redundant application (blade failure)]]
-***[[ISUP:General guidelines for designing a high-performance system|General guidelines for designing a high-performance system]]
-***[[ISUP:General guidelines to have highly redundant high-performance system (host failure)|General guidelines to have highly redundant high-performance system (host failure)]]
-**[[ISUP:Information element usage|Information element usage]]
-***[[ISUP:Information element usage#IE inclusion in different messages|IE inclusion in different messages]]  (NEED TO ADD TABLES 50 AND 51)
-**[[ISUP:ISUP functions and behaviours|ISUP functions and behaviours]]
-***[[ISUP:Blocking and unblocking|Blocking and unblocking]]
-***[[ISUP:Circuit group functions|Circuit group functions]]
-***[[ISUP:Flow control|Flow control]]
-***[[ISUP:Circuit continuity testing|Circuit continuity testing]]  (VALIDATE THE CODING REFERENCES AS WELL AS WORD REFERENCES)
-****[[ISUP:Circuit continuity testing#Continuity testing within a call|Continuity testing within a call]]
-****[[ISUP:ISUP:Circuit continuity testing#Continuity testing outside a call|Continuity testing outside a call]]
-**[[ISUP:Call flow and scenarios|Call flow and scenarios]]
-***Successful basic call setup (no ACM)
-***Successful basic call setup (with ACM)
-***Successful call setup (with CPG)
-***Successful call setup (overlap)
-***Successful call release
-***Outgoing call refused by incoming side
-***Call collision because racing condition host TB640
-***Call collision between two SS7 nodes
-***Call with successful continuity testing
-***Call with failed continuity testing and successful re-check
-***Call with failed continuity testing and no re-check
-***Call with failed continuity testing and failed re-check
-***Call with failed continuity testing and failed re-check (timeout)
-***Successful continuity testing out-of-call
-***Failed continuity testing out-of-call with successful re-check
-***Failed continuity testing out-of-call with failed re-check
-***Circuit group reset
-***Circuit blocking
-***Circuit group blocking
-***Circuit unblocking
-***Circuit group unblocking
-=== SCCP ===
+*[[ISUP|Overview]] (NEED TO FIND A HOME FOR ALL OF THE HISTORY AT BEGINNING OF SECTION]]
-*[[SCCP|Overview]]
+**ISUP summary
-**[[SCCP:Architecture|Architecture]]  (NEED TO REVISE GRAPHIC)
+**[[ISUP:Architecture|Architecture]]
-***[[SCCP:Connectionless Service|Connectionless Service]]
+**[[ISUP:Configuration sequence|Configuration sequence]]
-***[[SCCP:Management|Management]]
+**[[ISUP:Specification|Specification]]
-***[[SCCP:Addressing|Addressing]]
+*ISUP Configuration
-****[[SCCP:Global Title Translation Association|Global Title Translation Association]]
+**[[ISUP:Layout of the ISUP network|Layout of the ISUP network]]
-***[[SCCP:Routing|Routing]]
+**[[Configuration of layer|Configuration of layer]]
-***[[SCCP:Traffic Limitation and Congestion Control|Traffic Limitation and Congestion Control]]
+***[[Toolpack:Create an ISUP Stack|General configuration]]
-***[[SCCP:Interworking|Interworking]]
+***[[Toolpack:Create an ISUP Network|Network]]
-***[[SCCP:Messages|Messages]]
+***[[Toolpack:Create an ISUP User Part|Userpart]]
-**[[SCCP:Specification|Specification]]
+***[[Toolpack:Create an ISUP Interface|Interface]]
-*[[SCCP:Configuration|SCCP Configuration]]
+***[[Toolpack:Create an ISUP Circuit|Circuits]] (need to clean up; also, what is the equivalent section in the Web portal tutorial guide?)
-**[[SCCP:Configuration of layer|Configuration of layer]]
+*ISUP Signaling
-***[[SCCP:General Configuration|General Configuration]]
+**[[ISUP:Host application requirements|Host application requirements]]
-***[[SCCP:Network Configuration|Network Configuration]]
+***[[ISUP:General guidelines for designing an efficient call control application using ISUP|General guidelines for designing an efficient call control application using ISUP]]
-***[[SCCP:LSAP Configuration|LSAP Configuration]]
+***[[ISUP:General guidelines for designing highly redundant application (blade failure)|General guidelines for designing highly redundant application (blade failure)]]
-***[[SCCP:Route Configuration|Route Configuration]]
+***[[ISUP:General guidelines for designing a high-performance system|General guidelines for designing a high-performance system]]
-***[[SCCP:Userpart Configuration|Userpart Configuration]]
+***[[ISUP:General guidelines to achieve highly redundant high-performance system (host failure)|General guidelines to achieve highly redundant high-performance system (host failure)]]
-***[[SCCP:GTT Association Configuration|GTT Association Configuration]]
+**[[ISUP:Information element usage|Information element usage]]
-***[[SCCP:GTT Address Map Configuration|GTT Address Map Configuration]]
+***[[ISUP:Information element usage#IE_inclusion_in_different_messages|IE inclusion in different messages]]
-**[[SCCP:Compatibility|Compatibility]] (INCOMPLETE IN ORIGINAL GUIDE)
+**ISUP functions and behaviours
-***[[SCCP:Variants|Variants]]  (INCOMPLETE IN ORIGINAL GUIDE)
+***[[ISUP:Blocking and unblocking|Blocking and unblocking]]
-*[[SCCP:Alarms|SCCP Alarms]]
+***[[ISUP:Circuit group functions|Circuit group functions]]
-**[[SCCP:Alarm|Alarm]]
+***[[ISUP:Flow control|Flow control]]
-**[[SCCP:LSAP Alarm|LSAP Alarm]]
+***[[ISUP:Circuit continuity testing|Circuit continuity testing]] (VALIDATE THE CODING REFERENCES AS WELL AS WORD REFERENCES)
-**[[SCCP:Userpart Alarm|Userpart Alarm]]
+****[[ISUP:Circuit continuity testing#Continuity_testing_within_a_call|Continuity testing within a call]]
-**[[SCCP:Error Performance Report|Error Performance Report]]
+****[[ISUP:Circuit continuity testing#Continuity_testing_outside_a_call|Continuity testing outside a call]]
-*[[SCCP:States|SCCP States]]
-**[[SCCP:General States Get|General States Get]]
+=== SCCP  ===
-**[[SCCP:General States Set|General States Set]]
-**[[SCCP:Route States Get|Route States Get]]
+*[[SCCP|Overview]]
-*[[SCCP:Statistics|SCCP Statistics]]
+**[[SCCP:Architecture|Architecture]] (NEED TO REVISE GRAPHIC)
-**[[SCCP:General Statistics|General Statistics]] (CLEAN UP FORMATTING)
+***[[SCCP:Connectionless Service|Connectionless Service]]
-**[[SCCP:Userpart Statistics|Userpart Statistics]]
+***[[SCCP:Management|Management]]
-**[[SCCP:LSAP Statistics|LSAP Statistics]] (CLEAN UP FORMATTING)
+***[[SCCP:Addressing|Addressing]]
+****[[SCCP:Global Title Translation Association|Global Title Translation Association]]
+***[[SCCP:Routing|Routing]]
+***[[SCCP:Traffic Limitation and Congestion Control|Traffic Limitation and Congestion Control]]
+***[[SCCP:Interworking|Interworking]]
+***[[SCCP:Messages|Messages]]
+**[[SCCP:Specification|Specification]]
+*[[SCCP:Configuration|SCCP Configuration]]
+**[[Toolpack:Create a SCCP stack|General Configuration]]
+**[[Toolpack:Create a SCCP network|Network Configuration]]
+**[[Toolpack:Create a SCCP LSAP|LSAP Configuration]]
+**[[Toolpack:Create a SCCP route|Route Configuration]]
+**[[Toolpack:Create a SCCP userpart|Userpart Configuration]]
+**[[SCCP:GTT Association Configuration|GTT Association Configuration]]
+**[[SCCP:GTT Address Map Configuration|GTT Address Map Configuration]]
+*[[SCCP:Alarms|SCCP Alarms]]
+**[[SCCP:Error Performance Report|Error Performance Report]]
+*[[SCCP:States|SCCP States]]
+**[[SCCP:States#General_States|General States]]
+**[[SCCP:States#Route_States|Route States]]
+*[[SCCP:Statistics|SCCP Statistics]]
+**[[SCCP:Userpart Statistics|Userpart Statistics]]
+**[[SCCP:LSAP Statistics|LSAP Statistics]]
 **[[SCCP:Route Statistics|Route Statistics]]
-*SCCP Standalone mode
-**Data Request
-**Coordinate Request
-**Coordinate Response
-**Point Code SSN Status Request
-**SSN State Change Request
-**Data Received
-**Data Error Indication
-**Coordinate Indication
-**Coordinate Confirmation
-**Point Code SSN Status Confirmation
-**SSN State Change Indication
-**SSN State Change Confirmation
-**PC State Change Indication
-=== TCAP ===
+=== TCAP  ===
-*[[TCAP|Overview]]
-**[[TCAP:Architecture|Architecture]]
+*[[TCAP|Overview]]
-***[[TCAP:Message|Message]]
+**[[TCAP:Architecture|Architecture]] (MISSING 2 IMAGES)
-****[[TCAP:Message#Transaction portion|Transaction portion]]
+***[[TCAP:Message|Message]]
-****[[TCAP:Message#Dialogue portion|Dialogue portion]]
+****[[TCAP:Message#Transaction_portion|Transaction portion]]
-****[[TCAP:Message#Component portion|Component portion]]
+****[[TCAP:Message#Dialogue_portion|Dialogue portion]]
-**[[TCAP:Specification|Specification]]
+****[[TCAP:Message#Component_portion|Component portion]]
-*[[TCAP:Configuration|TCAP Configuration]]
+**[[TCAP:Specification|Specification]]
-**[[TCAP:Configuration of layer|Configuration of layer]]
+*[[TCAP:Configuration|TCAP Configuration]]
-***[[TCAP:General configuration|General configuration]]
+**[[TCAP:General configuration|General configuration]]
-***[[TCAP:Userpart configuration|Userpart configuration]]
+**[[TCAP:Userpart configuration|Userpart configuration]]
 *[[TCAP:Transaction|TCAP Transaction]]
 **[[TCAP:Creating new transaction|Creating new transaction]]
 **[[TCAP:Adding component portion|Adding component portion]]
 **[[TCAP:Sending transaction and dialogue portions|Sending transaction and dialogue portions]]
 **[[TCAP:Receiving component portion|Receiving component portion]]
 **[[TCAP:Receiving transaction and dialogue portions|Receiving transaction and dialogue portions]]
 **[[TCAP:Receiving transaction error indication|Receiving transaction error indication]]
-**[[TCAP:Transaction flow and scenarios|Transaction flow and scenarios]]
+*[[TCAP:TCAP Alarms|TCAP Alarms]]
-***[[TCAP:Successful unstructured dialogue (UNIDIRECTIONAL)|Successful unstructured dialogue (UNIDIRECTIONAL)]]
+**[[TCAP:TCAP Alarms#Userpart_Alarm|Userpart alarm]]
-***[[TCAP:Successful structured dialogue initiation|Successful structured dialogue initiation]]
+*[[TCAP:States|TCAP States]]
-***[[TCAP:Successful structured dialogue acceptation|Successful structured dialogue acceptation]]
+*[[TCAP:Statistics|TCAP Statistics]]
-***[[TCAP:Successful structured dialogue continuation|Successful structured dialogue continuation]]
-***[[TCAP:Successful structured dialogue termination|Successful structured dialogue termination]]
-***[[TCAP:Successful structured dialogue abort|Successful structured dialogue abort]]
-*[[TCAP:TCAP Alarms|TCAP Alarms]]
-**[[TCAP:Alarm|Alarm]]
-**[[TCAP:Userpart alarm|Userpart alarm]]
-*[[TCAP:States|TCAP States]]
-**[[TCAP:Userpart states get|Userpart states get]]
-*[[TCAP:Statistics|TCAP Statistics]]
 **[[TCAP:Userpart statistics|Userpart statistics]]
+<br>
+----
+<br>
+== Caveat  ==
+The signaling information/code contained in this document/product is based on the best information we have available. Although it has been tested successfully with other piece of signaling equipment, we cannot guarantee that it will conform to the usage of any particular switch in the field.